fatal trap / spin lock - src from 7/16/04

From: asfdqwer xzcvdsf (brueggma_at_yahoo.com)
Date: 07/29/04

  • Next message: Giorgos Keramidas: "-fformat-extensions broken"
    Date: Wed, 28 Jul 2004 15:53:41 -0700 (PDT)
    To: current@freebsd.org
    
    

    I just got this after a reboot:

    boot() called on cpu#0
    Waiting (max 60 seconds) for system process `vnlru' to
    stop...
    Process 'vnlru' stopped.
    Waiting (max 60 seconds) for system process
    `bufdaemon' to stop...
    Process 'bufdaemon' stopped.
    Waiting (max 60 seconds) for system process `syncer'
    to stop...
    Syncer syncing, vnodes remaining... 8 1 2 0 done.
    Process 'syncer' stopped.
    done
    Uptime: 20h55m21s
    Rebooting...
    cpu_reset called on cpu#0
    cpu_reset: Stopping other CPUs
    Console: serial port
    BIOS drive A: is disk0
    BIOS drive C: is disk1
    BIOS 640kB/2096128kB available memory

    FreeBSD/i386 bootstrap loader, Revision 1.1
    (root@athlon1.bsdnut.org, Sat Jul 10 22:18:32 CDT
    2004)
    Loading /boot/defaults/loader.conf
    /boot/kernel/kernel text=0x432bec data=0x77524+0x45258
    syms=[0x4+0x52290+0x4+0x64e85]
    |

     ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
     ³ ³
     ³ ³
       , ,
     ³ ³
      /( )`
     ³ Welcome to FreeBSD! ³
      \ \___ / |
     ³ ³
      /- _ `-/ '
     ³ ³
     (/\/ \ \ /\
     ³ 1. Boot FreeBSD [default] ³
     / / | ` \
     ³ 2. Boot FreeBSD with ACPI enabled ³
     O O ) / |
     ³ 3. Boot FreeBSD in Safe Mode ³
     `-^--'`< '
     ³ 4. Boot FreeBSD in single user mode ³
    (_.) _ ) /
     ³ 5. Boot FreeBSD with verbose logging ³
     `.___/` /
     ³ 6. Escape to loader prompt ³
       `-----' /
     ³ 7. Reboot ³ <----.
     __ / __ \
     ³ ³
    <----|====O)))==) \) /====
     ³ ³ <----'
    `--' `.__,' \
     ³ ³
       | |
     ³ ³
        \ / /\
     ³ Select option, [Enter] for default ³
    ______( (_ / \______/
     ³ or [Space] to pause timer 9 ³ ,'
     ,-----' |
     ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
    `--{__________)

    Copyright (c) 1992-2004 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
    1991, 1992, 1993, 1994
            The Regents of the University of California.
    All rights reserved.
    FreeBSD 5.2-CURRENT #0: Fri Jul 16 16:09:31 CDT 2004
       
    root@athlon1.bsdnut.org:/usr/obj/usr/src/sys/ATHLON
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: AMD Athlon(tm) MP 1900+ (1600.06-MHz 686-class
    CPU)
      Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
     
    Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
      AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
    real memory = 2147483648 (2048 MB)
    avail memory = 2096091136 (1998 MB)
    MPTable: <OEM00000 PROD00000000>
    FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
     cpu0 (BSP): APIC ID: 0
     cpu1 (AP): APIC ID: 1
    ioapic0: Assuming intbase of 0
    ioapic0 <Version 1.1> irqs 0-23 on motherboard
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    pcib0: <MPTable Host-PCI bridge> at pcibus 0 on
    motherboard
    pci0: <PCI bus> on pcib0
    agp0: <AMD 762 host to AGP bridge> port 0xe000-0xe003
    mem 0xfd060000-0xfd060fff,0xe8000000-0xefffffff at
    device 0.0 on pci0
    pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
    pci1: <PCI bus> on pcib1
    pci1: <display, VGA> at device 5.0 (no driver
    attached)
    isab0: <PCI-ISA bridge> at device 7.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <AMD 768 UDMA100 controller> port
    0xd000-0xd00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at
    device 7.1 on pci0
    ata0: at 0x1f0 irq 14 on atapci0
    ata1: at 0x170 irq 15 on atapci0
    pci0: <bridge, PCI-unknown> at device 7.3 (no driver
    attached)
    pci0: <multimedia, audio> at device 7.5 (no driver
    attached)
    em0: <Intel(R) PRO/1000 Network Connection, Version -
    1.7.25> port 0xdc00-0xdc3f mem
    0xfd000000-0xfd03ffff,0xfd040000-0xfd05ffff irq 17 at
    device 9.0 on pci0
    em0: [GIANT-LOCKED]
    em0: Ethernet address: 00:04:23:a7:c3:90
    em0: Speed:N/A Duplex:N/A
    pcib2: <MPTable PCI-PCI bridge> at device 16.0 on pci0
    pci2: <PCI bus> on pcib2
    ohci0: <OHCI (generic) USB controller> mem
    0xfc001000-0xfc001fff irq 19 at device 0.0 on pci2
    ohci0: [GIANT-LOCKED]
    usb0: OHCI version 1.0, legacy support
    usb0: <OHCI (generic) USB controller> on ohci0
    usb0: USB revision 1.0
    uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00,
    addr 1
    uhub0: 4 ports with 4 removable, self powered
    ahc0: <Adaptec 2940 Ultra SCSI adapter> port
    0xc000-0xc0ff mem 0xfc000000-0xfc000fff irq 17 at
    device 5.0 on pci2
    ahc0: [GIANT-LOCKED]
    aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
    cpu0 on motherboard
    cpu1 on motherboard
    orm0: <ISA Option ROMs> at iomem
    0xcc000-0xcc7ff,0xc0000-0xc8fff on isa0
    pmtimer0 on isa0
    atkbdc0: <Keyboard controller (i8042)> at port
    0x64,0x60 on isa0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    fdc0: <Enhanced floppy controller (i82077, NE72065 or
    clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
    ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
    isa0
    ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
    ppbus0: <Parallel port bus> on ppc0
    plip0: <PLIP network interface> on ppbus0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x100>
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 16550A, console
    sio1 at port 0x2f8-0x2ff irq 3 on isa0
    sio1: type 16550A
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
    0xa0000-0xbffff on isa0
    unknown: <PNP0303> can't assign resources (port)
    unknown: <PNP0501> can't assign resources (port)
    unknown: <PNP0700> can't assign resources (port)
    unknown: <PNP0400> can't assign resources (port)
    unknown: <PNP0501> can't assign resources (port)
    Timecounters tick every 1.000 msec
    ad0: 117800MB <IC35L120AVVA07-0> [239340/16/63] at
    ata0-master UDMA100
    ata1-slave: FAILURE - ATAPI_RESET no interrupt
    acd0: CDROM <CDU5211> at ata1-slave PIO4
    em0: Link is up 100 Mbps Half Duplex
    sa0 at ahc0 bus 0 target 0 lun 0
    sa0: <EXABYTE EXB-89008E030203 V39e> Removable
    Sequential Access SCSI-2 device
    sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
    SMP: AP CPU #1 Launched!
    Mounting root from ufs:/dev/ad0s1a
    Pre-seeding PRNG: kickstart.
    Loading configuration files.
    Entropy harvesting: interrupts ethernet point_to_point
    kickstart.
    Starting file system checks:
    /dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad0s1a: clean, 50230696 free (155008 frags,
    6259461 blocks, 0.3% fragmentation)
    /dev/ad0s1b: FILE SYSTEM CLEAN; SKIPPING CHECKS
    /dev/ad0s1b: clean, 393100 free (28 frags, 49134
    blocks, 0.0% fragmentation)
    Adding /usr/swap0 as additional swap

    Fatal trap 12: page fault while in kernel mode
    cpuid = 1; apic id = 01
    fault virtual address = 0x8
    fault code = supervisor read, page not
    present
    instruction pointer = 0x8:0xc06070dc
    stack pointer = 0x10:0xdd431c8c
    frame pointer = 0x10:0xdd431c98
    code segment = base 0x0, limit 0xfffff,
    type 0x1b
                            = DPL 0, pres 1, def32 1, gran
    1
    processor eflags = interrupt enabled, resume,
    IOPL = 0
    current process = 2 (g_event)
    trap number = 12
    panic: page fault
    cpuid = 1;
    boot() called on cpu#1
    Syncer sy
    Fatal double fault:
    eip = 0xc07be090
    esp = 0xdd415000
    ebp = 0xdd41501c
    cpuid = 1; apic id = 01
    panic: double fault
    cpuid = 1;
    boot() called on cpu#1
    spin lock sched lock held by 0xc3463580 for > 5
    seconds

                    
    __________________________________
    Do you Yahoo!?
    Yahoo! Mail is new and improved - Check it out!
    http://promotions.yahoo.com/new_mail
    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"


  • Next message: Giorgos Keramidas: "-fformat-extensions broken"

    Relevant Pages

    • [solved] fatal trap 12 on ASRock K7Upgrade-880 board
      ... During boot, I can use ... page fault while in kernel mode ... No dump device defined. ... port may not be enabled ...
      (freebsd-stable)
    • 6.0 panics on boot
      ... panic, Fatal trap 12, page fault at the NVidea driver in the boot. ... pci0: <ACPI PCI bus> on pcib0 ... fdc0: port ...
      (freebsd-questions)
    • RE: Problem with foppy drive
      ... I think I see your problem in the boot log. ... <ACPI PCI bus> on pcib0 ... <Parallel port bus> on ppc0 ... on ppbus0 ...
      (freebsd-questions)
    • Re: Linux 2.6.29-rc1 MAJOR advisory
      ... boot the 2.6.29-rc1 I had built destroyed the MCP55 eth0 port, ... now enabled in the bios and am using the 2nd & last eth1 port on this ... had to boot the patch -rc1 a second time. ... Hence the 2nd reboot. ...
      (Linux-Kernel)
    • nforce2 usb is broken on -stable
      ... the 2.0 boards lock up on boot during the uhub0 bus ... While I can boot without the devices and attach them later, ... cause the box to reset. ... ohci_root_ctrl_transfer: writing reset to port ...
      (freebsd-stable)