Re: 5.3-BETA1 for Alpha available

From: Andreas Kohn (andreas.kohn_at_gmx.net)
Date: 08/25/04

  • Next message: Kachun Lee: "Re: 5.3-BETA1 panic during boot up" 
    To: Marcel Moolenaar <marcel@xcllnt.net>
Date: Wed, 25 Aug 2004 01:34:45 +0200

    On Wed, 2004-08-25 at 01:14, Marcel Moolenaar wrote:
    > On Wed, Aug 25, 2004 at 12:49:45AM +0200, Andreas Kohn wrote:
    >
    > > With the miniinst I get a nice panic on boot:
    > >
    > > >>>boot dka100 -flags h
    > > (boot dka100.1.0.6.0 -flags h)
    > *snip*
    > > tga0: <DEC TGA (21030) 2D Graphics Accelerator> mem
    > > 0x88000000-0x8fffffff irq 9 at device 13.0 on pci0
    > >
    > > fatal kernel trap:
    > >
    > > trap entry = 0x2 (memory management fault)
    > > cpuid = 0
    > > faulting va = 0x88100050
    >
    > Is your SRM console serial or graphical?
    >
    > I have a similar looking problem when I switch the console to graphical.

    >>> show
    [...]
    console graphics
    [...]

    Same panic happens if
    >>> set console serial
    >>> boot dka100 -flags h

    (same means same, addresses, position, etc)

    > BTW: what happens if you disable syscons with:
    >
    > set hint.sc.0.disable="1"
    (disable or disabled? I tried both in the following cases)

    console=serial, sc=disabled: same panic.
    console=graphics, sc=disabled: same panic.

    >
    > > This is a boot message from 5.2-CURRENT (May 2):
    >
    > *snip*
    > > pci0: <display> at device 13.0 (no driver attached)
    >
    > There's no TGA driver there...
    Yes, I saw that too few minutes after sending the mail. The machine has
    said TGA adapter in it, but I don't have a compatible monitor, so I'm
    only operating it over serial console. (And ssh)
    Guess I removed the driver when cleaning the config. (Long time
    ago...somewhen in March IIRC).
    I'm currently cross-building a 6-CURRENT world, and will try that as
    well.
    Or should I instead try to find the point in time where tga stopped
    working?

  • Next message: Kachun Lee: "Re: 5.3-BETA1 panic during boot up"

    Relevant Pages

    • Re: Questions about Expect buffers & operation
      ... it looked like when I sent some characters to the channel that I could then turn ... out the channel to the virtual console that would not have an adverse effect ... to several individual computers. ... The switch allows you to flip between between the consoles of the various computers. ...
      (comp.lang.tcl)
    • Re: Questions about Expect buffers & operation
      ... you don't have to actually send the characters - just expect something you know ... looked like when I sent some characters to the channel that I could then turn ... out the channel to the virtual console that would not have an adverse effect ... The switch allows you to flip between ...
      (comp.lang.tcl)
    • Re: 2001 Honda Prelude automatic transmission fails to start
      ... Brad wrote: ... open up the console and start investigating. ... Older models had a "console switch" which followed the shift lever to tell the car what gear was selected. ... Apparently this dealership doesn't have anyone competent to troubleshoot electrical problems very well. ...
      (rec.autos.makers.honda)
    • Re: 2001 Honda Prelude automatic transmission fails to start
      ... open up the console and start investigating. ... Older models had a "console switch" which followed the shift lever to tell the car what gear was selected. ... Apparently this dealership doesn't have anyone competent to troubleshoot electrical problems very well. ... I'm now convinced it may be the ignition switch and don't know if I should take the car to another dealership or take it back to the same one I've been using since I bought the car. ...
      (rec.autos.makers.honda)
    • Re: How to logon via TS in Windows 2003 as the console user session?
      ... Use the /console command line switch. ... server and search for remote desktop console. ... > How do I logon via Terminal Services to the Administrator console session ... How do I take over the console session that is ...
      (microsoft.public.win2000.termserv.clients)