ACPI panic on Fujitsu-Siemens C6175

• Previous message: David Barbero: "Re: Problem with sound in 5.3-BETA2"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Date: Tue, 31 Aug 2004 22:40:12 +0200
To: freebsd-current@freebsd.org

Hi,

With ACPI enabled, I get the following panic scenario. This only happens
in multi-user mode, on a Fujitsu Siemens C6175. BIOS revision 1.31
(latest). On a 5.2.1 system, it worked correctly.

FreeBSD 5.3-BETA2 #0: Fri Aug 27 18:32:00 CEST 2004

#zzz
(when using APM instead of ACPI this gives a
"ioctl(APMIO_SUSPEND): invalid argument" message)
<suspend>
<hit resume button>
<resume>

I then get these kernel messages: (N,x,y,z vary)

---
usb0: interrupt while not operating ignored
ATAPI_RESET time=320us
ad0: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=N
ad0: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=N
slab at 0xc1xxxxxx, freei 12 = 0
panic: Duplicate free item 0xc1yyyyyy from zone 0xc1zzzzzz (g_bio)
[thread 100024]
Stopped at kdb_enter+0x30: leave
 db> panic
Dumping 191MB
Dump failed writing header (5)
---
The "dump failed" message is strange, as 191MB should fit on a 384MB
swap partition.
Could this be usb-related? usbd was still running when I suspended the
laptop.
I also get some error messages from the AML compiler when trying to
compile the AML code from acpidump -d
dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA2 #0: Fri Aug 27 18:32:00 CEST 2004
    root@82-168-140-74-bbxl.xdsl.tiscali.nl:/usr/obj/usr/src-releng_5/sys/RENE_2004-08-22d
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (497.56-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 201261056 (191 MB)
avail memory = 187260928 (178 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <FUJ IRIS> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x9> port 0x66,0x62 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <bridge, PCI-CardBus> at device 4.0 (no driver attached)
pci0: <bridge, PCI-CardBus> at device 4.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1080-0x108f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x10a0-0x10bf irq 9 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0xff80-0xff8f irq 9 at device 7.3 on pci0
intpm0: I/O mapped ff80
intpm0: intr IRQ 9 enabled revision 0
intpm0: [GIANT-LOCKED]
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
intpm0: PM I/O mapped 1000 
pcm0: <Crystal Semiconductor CS4281> mem 0xfc110000-0xfc11ffff,0xfc101000-0xfc101fff irq 5 at device 8.0 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Cirrus Logic CS4297A AC97 Codec>
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1040-0x107f mem 0xfc000000-0xfc0fffff,0xfc100000-0xfc100fff irq 9 at device 16.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:d0:59:01:ed:22
fxp0: [GIANT-LOCKED]
speaker0 port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x3 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x2040 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
Timecounter "TSC" frequency 497559355 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
witness_get: witness exhausted
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 5729MB <FUJITSU MHK2060AT/D837> [12416/15/63] at ata0-master UDMA33
ATAPI_RESET time = 330us
acd0: CDROM <CD-224E/1.7A> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
KDB: enter: manual escape to debugger

• application/pgp-signature attachment: stored

• Previous message: David Barbero: "Re: Problem with sound in 5.3-BETA2"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]