Re: Addendum: FreeBSD 5.3-BETA2 for Alpha/AXP Available

From: Wilko Bulte (wb_at_freebie.xs4all.nl)
Date: 08/31/04

  • Next message: Brooks Davis: "Re: USB keyboard problems"
    Date: Tue, 31 Aug 2004 23:52:26 +0200
    To: Phil Brennan <phil.brennan@gmail.com>
    
    

    On Tue, Aug 31, 2004 at 10:51:13PM +0100, Phil Brennan wrote..
    > I'll post that output up tomorrow, when I get access to that machine again.
    > In the meantime, the alphaserver 800 installed fine, but dc0 reports
    > no carrier, there isn't even a link light on the card. This machine
    > was working perfectly with 4.10, and reasonably with 5.2.1. Is this dc
    > problem a known problem?

    No, dc(4) is onboard on my DS10 and I use it all the time.

    -- 
    Wilko Bulte				wilko@FreeBSD.org
    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
    

  • Next message: Brooks Davis: "Re: USB keyboard problems"

    Relevant Pages

    • [HPADM] RE: - SUMMARY - 1000Base SX Fiber Ethernet A4926A
      ... still did not get a link light either on the 4926 or the switch. ... hpgelanconf file was OK and the switch and 4926 matched on all parameters. ... I have re-booted this HP in the past with this card installed. ... Needless to say you cannot use your regular Cat5 cables for 1Gbit lan. ...
      (HP-UX-Admin)
    • Re: Configuring intnernal JetDirect on LaserJet 4 from BNC to TP
      ... a link light on the switch to the printer. ... port of BNC and the I/O card not ready. ... > LaserJet 4 line of printers to work on a twisted pair network? ... > but free chat support was making me crazy trying to find it, ...
      (comp.sys.hp.hardware)
    • Configuring an internal JetDirect on a LaserJet 4
      ... a link light on the switch to the printer. ... port of BNC and the I/O card not ready. ... > LaserJet 4 line of printers to work on a twisted pair network? ... > but free chat support was making me crazy trying to find it, ...
      (comp.sys.hp.misc)
    • Re: Turning off network Link status on Solaris
      ... > unconfigure the card. ... Unplug the tp cable. ... why on earth are you trying to 'turn off the link light' on ...
      (comp.unix.solaris)
    • RE: only 1 card is "active", why
      ... No carrier means, the NIC does not see a switch/hub at the other end. ... need to plug in one card into the switch connected to your LAN and the other ... PIN 700091 ...
      (freebsd-questions)