PE2850 + FreeBSD 5.3-BETA6 - Keyboard not working

Muthu_T_at_Dell.com
Date: 09/29/04

  • Next message: Thomas Dickey: "Re: HEADS-UP: Library version number bumps" 
    Date: Wed, 29 Sep 2004 08:42:32 -0500
To: <freebsd-current@freebsd.org>

    All,

       Successfully installed FreeBSD 5.3-BETA6 on Dell PE2860.
    After rebooting in the login prompt the system doesn't accept any
    keystrokes.
    I have 1 USB and 1 PS/2 Keyboard. Both keyboards are working (caps
    on/off, Numlock on/off works), but the characters doesn't comes to the
    system console.

    Attaching the dmesg output.

    Looks like DELL DRAC (Dell Remote Access Card) card is identified as
    Keyboard.
    See the line: (ukbd0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1)

    Any fixes?

    ------------------------------------------------------------------------
    -------------------------
    Copyright (c) 1992-2004 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights
    reserved.
    FreeBSD 5.3-BETA6 #0: Sat Sep 25 19:41:14 UTC 2004
        root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3391.52-MHz 686-class CPU)
      Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
     
    Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
    ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
      Hyperthreading: 2 logical CPUs
    real memory = 1073479680 (1023 MB)
    avail memory = 1040932864 (992 MB)
    ACPI APIC Table: <DELL PE BKC >
    FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
     cpu0 (BSP): APIC ID: 0
     cpu1 (AP): APIC ID: 1
     cpu2 (AP): APIC ID: 6
     cpu3 (AP): APIC ID: 7
    ioapic0: Changing APIC ID to 8
    ioapic1: Changing APIC ID to 9
    ioapic1: WARNING: intbase 32 != expected base 24
    ioapic2: Changing APIC ID to 10
    ioapic2: WARNING: intbase 64 != expected base 56
    ioapic3: Changing APIC ID to 11
    ioapic3: WARNING: intbase 96 != expected base 88
    ioapic0 <Version 2.0> irqs 0-23 on motherboard
    ioapic1 <Version 2.0> irqs 32-55 on motherboard
    ioapic2 <Version 2.0> irqs 64-87 on motherboard
    ioapic3 <Version 2.0> irqs 96-119 on motherboard
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    acpi0: <DELL PE BKC> on motherboard
    acpi0: Power Button (fixed)
    Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
    cpu0: <ACPI CPU> on acpi0
    cpu1: <ACPI CPU> on acpi0
    cpu2: <ACPI CPU> on acpi0
    cpu3: <ACPI CPU> on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pci0: <ACPI PCI bus> on pcib0
    pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
    pci1: <ACPI PCI bus> on pcib1
    pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
    pci2: <ACPI PCI bus> on pcib2
    amr0: <LSILogic MegaRAID> mem
    0xdfdc0000-0xdfdfffff,0xd80f0000-0xd80fffff irq 46 at device 14.0 on
    pci2
    amr0: [GIANT-LOCKED]
    amr0: <LSILogic PERC 4e/Di> Firmware 513O, BIOS H418, 256MB RAM
    pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
    pci3: <ACPI PCI bus> on pcib3
    pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
    pci4: <ACPI PCI bus> on pcib4
    pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
    pci5: <ACPI PCI bus> on pcib5
    pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
    pci6: <ACPI PCI bus> on pcib6
    em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
    0xecc0-0xecff mem 0xdfae0000-0xdfafffff irq 64 at device 7.0 on pci6
    em0: Ethernet address: 00:11:43:30:cc:1e
    em0: Speed:N/A Duplex:N/A
    pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
    pci7: <ACPI PCI bus> on pcib7
    em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
    0xdcc0-0xdcff mem 0xdf8e0000-0xdf8fffff irq 65 at device 8.0 on pci7
    em1: Ethernet address: 00:11:43:30:cc:1f
    em1: Speed:N/A Duplex:N/A
    pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
    pci8: <ACPI PCI bus> on pcib8
    pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8
    pci9: <ACPI PCI bus> on pcib9
    pcib10: <ACPI PCI-PCI bridge> at device 0.2 on pci8
    pci10: <ACPI PCI bus> on pcib10
    uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbce0-0xbcff
    irq 16 at device 29.0 on pci0
    uhci0: [GIANT-LOCKED]
    usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
    usb0: USB revision 1.0
    uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    ukbd0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
    kbd1 at ukbd0
    ums0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
    ums0: X report 0x0002 not supported
    device_attach: ums0 attach returned 6
    uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbcc0-0xbcdf
    irq 19 at device 29.1 on pci0
    uhci1: [GIANT-LOCKED]
    usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
    usb1: USB revision 1.0
    uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 2 ports with 2 removable, self powered
    uhub2: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2
    uhub2: 2 ports with 2 removable, self powered
    ukbd1: CHICONY USB Keyboard, rev 1.10/1.03, addr 3, iclass 3/1
    kbd2 at ukbd1
    ums0: CHICONY USB Keyboard, rev 1.10/1.03, addr 3, iclass 3/1
    ums0: 3 buttons and Z dir.
    uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbca0-0xbcbf
    irq 18 at device 29.2 on pci0
    uhci2: [GIANT-LOCKED]
    usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
    usb2: USB revision 1.0
    uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub3: 2 ports with 2 removable, self powered
    pci0: <serial bus, USB> at device 29.7 (no driver attached)
    pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
    pci11: <ACPI PCI bus> on pcib11
    pci11: <unknown> at device 5.0 (no driver attached)
    pci11: <unknown> at device 5.1 (no driver attached)
    pci11: <unknown> at device 5.2 (no driver attached)
    atapci0: <SiI 0680 UDMA133 controller> port
    0xcc70-0xcc7f,0xccd0-0xccd3,0xccd8-0xccdf,0xcce4-0xcce7,0xccf0-0xccf7
    irq 23 at device 6.0 on pci11
    ata2: channel #0 on atapci0
    ata3: channel #1 on atapci0
    pci11: <display, VGA> at device 13.0 (no driver attached)
    isab0: <PCI-ISA bridge> at device 31.0 on pci0
    isa0: <ISA bus> on isab0
    atapci1: <Intel ICH5 UDMA100 controller> port
    0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
    ata0: channel #0 on atapci1
    ata1: channel #1 on atapci1
    fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
    acpi0
    fdc0: [FAST]
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: [GIANT-LOCKED]
    psm0: model Generic PS/2 mouse, device ID 0
    sio0 port 0x3f8-0x3ff irq 4 on acpi0
    sio0: type 16550A
    orm0: <ISA Option ROMs> at iomem
    0xec000-0xeffff,0xd2800-0xd37ff,0xcb000-0xcbfff,0xc0000-0xcafff on isa0
    pmtimer0 on isa0
    ppc0: parallel port not found.
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    sio1: configured irq 3 not in bitmap of probed irqs 0
    sio1: port may not be enabled
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
    isa0
    Timecounters tick every 10.000 msec
    ATAPI_RESET time = 20us
    acd0: CDROM <TEAC CD-ROM CD-224E/K.9A> at ata0-master UDMA33
    ATAPI_RESET time = 540us
    ATAPI_RESET time = 570us
    ata2-master: FAILURE - SETFEATURES SET TRANSFER MODE
    status=41<READY,ERROR> error=4<ABORTED>
    ata2-slave: FAILURE - SETFEATURES SET TRANSFER MODE
    status=41<READY,ERROR> error=4<ABORTED>
    acd1: CDROM <VIRTUALCDROM DRIVE/> at ata2-slave BIOSPIO
    amrd0: <LSILogic MegaRAID logical drive> on amr0
    amrd0: 34680MB (71024640 sectors) RAID 1 (optimal)
    amrd1: <LSILogic MegaRAID logical drive> on amr0
    amrd1: 104040MB (213073920 sectors) RAID 5 (optimal)
    ses0 at amr0 bus 0 target 6 lun 0
    ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed Processor SCSI-2 device
    ses0: SAF-TE Compliant Device
    ses1 at amr0 bus 1 target 6 lun 0
    ses1: <PE/PV 1x4 SCSI BP 1.0> Fixed Processor SCSI-2 device
    ses1: SAF-TE Compliant Device
    SMP: AP CPU #2 Launched!
    SMP: AP CPU #1 Launched!
    SMP: AP CPU #3 Launched!
    Mounting root from ufs:/dev/amrd0s1a

    -----------------------------------------------

    --T. Muthu Mohan

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Thomas Dickey: "Re: HEADS-UP: Library version number bumps"