instant reboot when trying to load recent RELENG_5 kernel

From: Jon Noack (noackjr_at_alumni.rice.edu)
Date: 10/15/04

  • Next message: Don Lewis: "Re: 5.3-BETA7 install cd: kernel trap 12 with interrupts disabled (fwd)" 
    Date: Fri, 15 Oct 2004 16:53:45 -0500
To: current@freebsd.org

    Updated my RELENG_5 machines today and one of them did not survive the
    reboot. When the loader tries to load the kernel, the machine instantly
    reboots. I thought it might be due to using CPUTYPE?=athlon-xp in
    /etc/make.conf, but it still happens on a kernel compiled with CPUTYPE
    commented out. I also tried versions of the loader compiled with and
    without CPUTYPE; both loaders were able to successfully load a kernel
    from 3 days ago but neither of them succeeded with various kernels
    compiled today.

    This machine has an Asus A7N266 motherboard and an Athlon XP 1800
    processor. For a while now it has needed ACPI disabled as it will
    instantly reboot with ACPI enabled. I was using the latest BIOS (1004)
    but updated the latest beta (1005.005) after this started happening.
    The beta doesn't appear to change anything that I can tell.

    The machine also recently developed the annoying habit of not coming
    back up after a reboot. I have to go power cycle it or press reset.
    This is similar to behavior I've seen on motherboards with dying
    capacitors, but the difference here is that it *always* succeeds when I
    manually power it up/reset it. Machines with dying capacitors would
    sometimes fail at that time too.

    Jon

    $ dmesg
    Copyright (c) 1992-2004 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
             The Regents of the University of California. All rights reserved.
    FreeBSD 5.3-BETA7 #4: Tue Oct 12 14:36:37 CDT 2004
         root@proxy.concordiacrusaders.org:/usr/obj/usr/src/sys/PROXY
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: AMD Athlon(TM) XP 1800+ (1536.83-MHz 686-class CPU)
       Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
     
    Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
       AMD Features=0xc0400000<AMIE,DSP,3DNow!>
    real memory = 1065271296 (1015 MB)
    avail memory = 1036959744 (988 MB)
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    pcib0: <Host to PCI bridge> pcibus 0 on motherboard
    pir0: <PCI Interrupt Routing Table: 14 Entries> on motherboard
    pci0: <PCI bus> on pcib0
    $PIR: No matching entry for 0.1.INTA
    agp0: <NVIDIA nForce AGP Controller> mem 0xf8000000-0xfbffffff at device
    0.0 on pci0
    pci0: <memory, RAM> at device 0.1 (no driver attached)
    pci0: <memory, RAM> at device 0.2 (no driver attached)
    pci0: <memory, RAM> at device 0.3 (no driver attached)
    isab0: <PCI-ISA bridge> at device 1.0 on pci0
    isa0: <ISA bus> on isab0
    pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
    pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0
    pci1: <PCI bus> on pcib1
    $PIR: No matching entry for 1.10.INTA
    ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0xc800-0xc8ff mem
    0xe5000000-0xe5000fff irq 7 at device 8.0 on pci1
    ahc0: [GIANT-LOCKED]
    aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
    fxp0: <Intel 82550 Pro/100 Ethernet> port 0xc400-0xc43f mem
    0xe4000000-0xe401ffff,0xe4800000-0xe4800fff irq 5 at device 10.0 on pci1
    miibus0: <MII bus> on fxp0
    inphy0: <i82555 10/100 media interface> on miibus0
    inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    fxp0: Ethernet address: 00:02:b3:28:44:a0
    atapci0: <nVidia nForce UDMA100 controller> port
    0xb800-0xb80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0
    ata0: channel #0 on atapci0
    ata1: channel #1 on atapci0
    pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
    pci2: <PCI bus> on pcib2
    pci2: <display, VGA> at device 0.0 (no driver attached)
    cpu0 on motherboard
    orm0: <ISA Option ROM> at iomem 0xd8000-0xd97ff on isa0
    pmtimer0 on isa0
    atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: [GIANT-LOCKED]
    psm0: model IntelliMouse, device ID 3
    fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
    fdc0: [FAST]
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 16550A
    sio1: configured irq 3 not in bitmap of probed irqs 0
    sio1: port may not be enabled
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    unknown: <PNP0501> can't assign resources (port)
    unknown: <PNP0700> can't assign resources (port)
    unknown: <PNP0f13> can't assign resources (irq)
    ahc1: No resources allocated.
    ahc1: No resources allocated.
    unknown: <PNP0303> can't assign resources (port)
    unknown: <PNP0c02> can't assign resources (port)
    Timecounter "TSC" frequency 1536825688 Hz quality 800
    Timecounters tick every 1.000 msec
    ad0: 78533MB <IC35L080AVVA07-0/VA4OA50K> [159560/16/63] at ata0-master
    UDMA100
    acd0: DVDROM <LITEON DVD-ROM LTD163D/GHR3> at ata1-master UDMA33
    Waiting 15 seconds for SCSI devices to settle
    da0 at ahc0 bus 0 target 0 lun 0
    da0: <QUANTUM ATLAS V 9 SCA 0201> Fixed Direct Access SCSI-3 device
    da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged
    Queueing Enabled
    da0: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C)
    da1 at ahc0 bus 0 target 1 lun 0
    da1: <QUANTUM ATLAS V 9 SCA 0201> Fixed Direct Access SCSI-3 device
    da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged
    Queueing Enabled
    da1: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C)
    Mounting root from ufs:/dev/ad0s1a
    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Don Lewis: "Re: 5.3-BETA7 install cd: kernel trap 12 with interrupts disabled (fwd)"

    Relevant Pages

    • 6.0 Release kernel panic - page fault
      ... I'm experiencing kernel panics with 6.0 Release. ... port ... can't assign resources ... Additional ABI support: ...
      (freebsd-questions)
    • Kernel Panics in 6.1 and 6.2 always Exim 4
      ... Well after a year we still haven't tracked down the kernel panic problems ... <Parallel port bus> on ppc0 ... unknown: can't assign resources (memory) ...
      (freebsd-questions)
    • 6.1-PRERELEASE nfs root troubles
      ... kernel with help of etherboot. ... <Parallel port bus> on ppc0 ... unknown: can't assign resources (memory) ...
      (freebsd-stable)
    • Re: UART misbehaves under Linkstation/KuroBoxHG
      ... me the port is 0x000? ... comes with the linkstation kernel describes the ports and IRQs ... In principle, as mentioned elsewhere before, you don't need any daemons on ... and properly sends reboot and power-off commands ...
      (Linux-Kernel)
    • FB-5.1: pcm1 attach returned 6
      ... unknown: can't assign resources (port) ... I still receive the same message upon reboot, ...
      (comp.unix.bsd.freebsd.misc)