Re: SD Card Problem

From: Anton Nikiforov (anton_at_nikiforov.ru)
Date: 11/05/04

  • Next message: Scott Long: "5.3-RELEASE TODO" 
    Date: Fri, 05 Nov 2004 12:23:59 +0300
To: "M. Warner Losh" <imp@bsdimp.com>

    M. Warner Losh wrote:
    > In message: <4188A57B.3060005@nikiforov.ru>
    > : The things you have recommend was done :)
    > : This does not help
    > : Nov 3 12:29:27 latitude kernel: Status is 0x30000006
    > : Nov 3 12:29:33 latitude kernel: Status is 0x30000810
    > : Nov 3 12:29:33 latitude kernel: cbb0: card inserted: event=0x00000000,
    > : state=30000810
    > : Nov 3 12:29:33 latitude kernel: cbb0: PC Card card activation failed
    > : So the card is still not working.
    >
    > Can you set the sysctl 'hw.cbb.debug=1' and 'hw.pccard.debug=1' before
    > inserting the card and send me the results?
    >
    >
    Hi!
    I did it and here is the log:

    Nov 5 12:22:46 latitude kernel: Status is 0x30000810
    Nov 5 12:22:46 latitude kernel: cbb0: card inserted: event=0x00000000,
    state=30000810
    Nov 5 12:22:46 latitude kernel: pccard0: chip_socket_enable
    Nov 5 12:22:46 latitude kernel: cbb_pcic_socket_enable:
    Nov 5 12:22:46 latitude kernel: cbb0: cbb_power: 3V
    Nov 5 12:22:46 latitude kernel: pccard0: read_cis
    Nov 5 12:22:48 latitude kernel: pccard0: check_cis_quirks
    Nov 5 12:22:48 latitude kernel: pccard0: CIS version PC Card Standard 5.0
    Nov 5 12:22:48 latitude kernel: pccard0: CIS info: RICOH, Bay1Controller
    Nov 5 12:22:48 latitude kernel: pccard0: Manufacturer code 0x0, product 0x0
    Nov 5 12:22:48 latitude kernel: pccard0: function 0: unknown (254), ccr
    addr 100 mask f
    Nov 5 12:22:48 latitude kernel: pccard0: function 0, config table entry
    1: memory card; irq mask 0; memspace 0-fff; mwait_required rdybsy_active
    powerdown
    Nov 5 12:22:48 latitude kernel: pccard0: functions scanning
    Nov 5 12:22:48 latitude kernel: pccard0: Card has 1 functions.
    pccard_mfc is 0
    Nov 5 12:22:48 latitude kernel: pccard0: Memory space not yet implemented.
    Nov 5 12:22:48 latitude kernel: pccard0: Neither memory nor I/O mampped
    Nov 5 12:22:48 latitude kernel: pccard0: Allocation failed for cfe 1
    Nov 5 12:22:48 latitude kernel: cbb_pcic_socket_enable:
    Nov 5 12:22:48 latitude kernel: cbb0: cbb_power: 0V
    Nov 5 12:22:48 latitude kernel: cbb0: cbb_power: 3V
    Nov 5 12:22:48 latitude kernel: pccard0: No config entry could be
    allocated. 

    -- 
С уважением (Best regads),
Антон Никифоров (Anton Nikiforov)

  • Next message: Scott Long: "5.3-RELEASE TODO"

    Relevant Pages

    • cbb problem (long post)
      ... pcib2: device cbb0 requested decoded memory range 0x20000000-0xffffffff ... pccard0: ... PC Card card activation failed ...
      (freebsd-current)
    • Re: Cisco driver stopped working with -current
      ... >>pcmcia card is now picked up by the xe driver rather than an. ... <ACPI PCI bus> on pcib0 ... slot 2 INTA is routed to irq 9 ... pccard0: ...
      (freebsd-current)
    • CF cards / ATAng / interrupt code still broken
      ... ago has problems to boot with my 128MB noname CF card inserted. ... The panic output is very similar the problem Alex Dupre reported ... pccard0: CIS version PCCARD 2.0 or 2.1 ... GEOM: create disk ad0 dp=0xc2972b60 ...
      (freebsd-current)
    • Re: pccard0: Card has no functions!
      ... pcib5: pccard0 requested memory range 0xfe300000-0xfeafffff: good ... cis mem map 0xe6e2c000 ... PC Card card activation failed ... device = 'RL5c475 CardBus Controller' ...
      (freebsd-hackers)
    • pccard0: Card has no functions!
      ... I have Nokia Card Phone 2.0 in a PCMCIA to PCI ... pccard0: chip_socket_enable ... cbb0: ... <ACPI PCI bus> on pcib0 ...
      (freebsd-hackers)