Re: Interrupt storm

From: Mike Tancsa (mike_at_sentex.net)
Date: 03/29/05

  • Next message: Jung-uk Kim: "Re: Interrupt storm"
    Date: Tue, 29 Mar 2005 13:59:28 -0500
    To: Dan Cojocar <dan.cojocar@gmail.com>, freebsd-current@freebsd.org
    
    

    At 01:22 PM 29/03/2005, Dan Cojocar wrote:
    >Hello all,
    >
    >I noticed the following interrupt storm in my dmesg:
    >
    >Interrupt storm detected on "irq11: rl1"; throttling interrupt source
    >Interrupt storm detected on "irq5: rl0"; throttling interrupt source

    If you disable USB in the BIOS, does it make the problem go away ? Or, if
    it is disabled, the dmesg seems to be showing that its still there. Try
    defining the driver for the USB controller, with USB enabled in the BIOS.

             ---Mike

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"


  • Next message: Jung-uk Kim: "Re: Interrupt storm"

    Relevant Pages

    • Re: Unknown Hardware
      ... I would check your bios settings for usb ports\devices. ... devices then disable usb devices in the bios and see if the message goes ... If your mouse or keyboard are usb then don't disable usb unless you ...
      (microsoft.public.windowsxp.general)
    • Re: Interrupt storm
      ... the dmesg seems to be showing that its still there. ... > defining the driver for the USB controller, with USB enabled in the BIOS. ... I have disables the USB from BIOS and i have the same storm. ...
      (freebsd-current)
    • Re: FreeBSD doesnt boot at Supermicro H8SSL-i2
      ... Check that the USB speed setting in the BIOS is set to its defaults, ... USB 2.0 Controller Mode: Fullspeed ... BIOS EHCI Hand-off: Enable ... There is no way to disable USB completely? ...
      (freebsd-stable)
    • Problems with HP dx5150/ATI Xpress 200 chipset
      ... ATI USB ... For all the installs I made the following changes to the default BIOS ... basic functionality, including network working. ... APIC settings did not seem to affect obsd boot or installs, ...
      (comp.unix.bsd.freebsd.misc)
    • Problems with HP dx5150/ATI Xpress 200 chipset
      ... ATI USB ... For all the installs I made the following changes to the default BIOS ... basic functionality, including network working. ... APIC settings did not seem to affect obsd boot or installs, ...
      (comp.unix.bsd.openbsd.misc)