2.5" USB hardrivedrive problem
From: qoska kotfare (seditaniedi_at_gmail.com)
Date: 06/28/05
- Previous message: Goran Gajic: "6.0-current panic"
- Next in thread: Doug White: "Re: 2.5" USB hardrivedrive problem"
- Reply: Doug White: "Re: 2.5" USB hardrivedrive problem"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Tue, 28 Jun 2005 19:26:25 +0200 To: freebsd-current@freebsd.org
Hello there!
My question is about external 2.5" USB harddisk i seem to not get it
recognized by FreeBSD and i am hoping to get a solution :)
The case has inside a TOSHIBA MK3017GAP 30Gb drive
I tried modifying some quirks on /usr/src/sys/cam/scsi/scsi_da.c and
the same problem again. Ah forgott the error messages are at the end
of the dmesg output regardingg umass0 !!!
/* dmesg output
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #7: Mon Jun 27 17:42:27 CEST 2005
ermali@qoska:/usr/obj/usr/src/sys/QOSKA
ACPI APIC Table: <ASUS P4SDX >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (2000.15-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNTX-ID,<b14>>
real memory = 1073725440 (1023 MB)
avail memory = 1037602816 (989 MB)
ioapic0 <Version 8.0> irqs 0-23 on motherboard
netsmb_dev: loaded
acpi0: <ASUS P4SDX> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 3 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 5 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 9 on acpi0
pci_link6: <ACPI PCI Link LNKG> on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 9 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 655 host to AGP bridge> mem 0xe8000000-0xebffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce4 MX 440 with AGP8X> mem
0xe7000000-0xe7ffffff,0xf0000000-0xf7ffffff irq 16 at device 0.0 on
pci1
nvidia0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 963 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xb400-0xb40f irq 16 at device 2.5
on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <SiS 7012> port 0xa400-0xa4ff,0xa000-0xa07f irq 18 at device 2.7 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1980 AC97 Codec>
ohci0: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 20 at
device 3.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 21 at
device 3.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe5800000-0xe5800fff
irq 23 at device 3.3 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
sis0: <SiS 900 10/100BaseTX> port 0x9800-0x98ff mem
0xe5000000-0xe5000fff irq 19 at device 4.0 on pci0
miibus0: <Mrlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:0c:6e:d3:9b:a0
rl0: <RealTek 8139 10/100BaseTX> port 0x9400-0x94ff mem
0xe4800000-0xe48000ff irq 18 at device 10.0 on pci0
miibus1: <MII bus> on rl0
rlphy1: <RealTek internal media interface> on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:06:4f:09:8b:62
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7
drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
umass0: ScanLogic USBIDE ScanLogic USBIDE, rev 1.10/2.60, addr 2
Timecounter "TSC" frequency 2000152380 Hz quality 800
Timecounters tick every 1.000 msec
Fast IPsec: Initialized Security Association Processing.
ad0: 39205MB <Maxtor 6E040L0 NAR61590> at ata0-master UDMA133
ad1: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata0-slave UDMA133
acd0: CDRW <HL-DT-ST GCE-8523B/1.01> at ata1-master UDMA33
umass0: Invalid CSW: tag 80 should be 1
ATA PseudoRAID loaded
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST CD-RW GCE-8523B 1.01> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not
present - tray closed
umass0: Invalid CSW: tag 524632 should be 2
umass0: Invalid CSW: tag 524632 should be 3
umass0: Invalid CSW: tag 524632 should be 4
umass0: Invalid CSW: tag 524632 should be 5
umass0: Invalid CSW: tag 524632 should be 6
(da0:umass-sim0:0:0:0): got CAM status 0x4
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): lost device
umass0: Invalid CSW: tag 524632 should be 7
umass0: Invalid CSW: tag 524632 should be 8
umass0: Invalid CSW: tag 524632 should be 9
umass0: Invalid CSW: tag 524632 should be 10
umass0: Invalid CSW: tag 524632 should be 11
(da0:umass-sim0:0:0:0): removing device entry
Opened disk da0 -> 5
Trying to mount root from ufs:/dev/ad0s3a
sis0: link state changed to DOWN
sis0: link state changed to UP
Accounting enabled
end dmesg output */
I am attaching even my kernel config file just in case.
U can tell me if i have to give any other information.
Thanks in advance!
/* kernel config file
machine i386
cpu I686_CPU
ident QOSKA
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions COPTFLAGS=" -O -pipe"
options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
#options INET6
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_LINUX
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options ADAPTIVE_GIANT # Giant mutex is adaptive.
#options NET_WITH_GIANT
options PREEMPTION
#options FULL_PREEMPTION
options ALTQ
options ALTQ_CBQ
options ALTQ_RED
options ALTQ_RIO
options ALTQ_HFSC
options ALTQ_CDNR
options ALTQ_PRIQ
#options ALTQ_NOPCC #for SMP build
options BRIDGE
device pf
device pflog
device pfsync
options TCP_DROP_SYNFIN
options ZERO_COPY_SOCKETS
#options VFS_AIO
options DEVICE_POLLING
options HZ=1000
#options IPFILTER
#options IPFILTER_LOG
options IPSTEALTH
options NETGRAPH
options NETSMB
options NETSMBCRYPTO
options LIBMCHAIN
options LIBICONV
options SMBFS
#options IPSEC
#options IPSEC_ESP
options FAST_IPSEC
#options SMP
device apic # I/O APIC
# Bus support. Do not remove isa, even if you have no isa slots
device isa
device eisa
device pci
device crypto
device acpi
device mem
device cpufreq
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
device atapicam
device scbus
device da
device cd
device pass
device md
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
options VESA
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
device miibus # MII bus support
device rl # RealTek 8129/8139
device sis # Silicon Integrated Systems SiS 900/SiS 7016
# Wireless NIC cards
device wlan # 802.11 support
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
# Pseudo devices.
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci
device usb # USB Bus (required)
device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
device sound
device snd_ich
options SC_ALT_MOUSE_IMAGE
options SC_HISTORY_SIZE=1000
options SC_PIXEL_MODE
options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
options SC_NORM_REV_ATTR=(FG_BLACK|BG_GREEN)
options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK)
options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
end kernel config file */
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
- Previous message: Goran Gajic: "6.0-current panic"
- Next in thread: Doug White: "Re: 2.5" USB hardrivedrive problem"
- Reply: Doug White: "Re: 2.5" USB hardrivedrive problem"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
