Re: Page fault while booting

From: Danny Pansters (danny_at_ricin.com)
Date: 07/27/05

  • Next message: Daniel O'Connor: "Re: 6-BETA1 iwi + wpa_supplicant fails, and sometimes silently re boots" 
    To: freebsd-current@freebsd.org
Date: Wed, 27 Jul 2005 15:49:36 +0200

    On Wednesday 27 July 2005 01:21, Justin R. Smith wrote:
    > I upgraded to current on the 23rd and got
    >
    > FATAL TRAP 12
    >
    > PAGE FAULT WHILE IN KERNEL MODE
    >
    > VIRTUAL ADDRESS
    > 0x480008
    >
    > Current process=0 SWAPPER
    >

    Did you rebuild the nvidia module (and rtc if you happen to also use that) for
    the new kernel?

    HTH,

    Dan

    > This was with the GENERIC kernel. I've retreated to the 5.4 stable kernel
    >
    > My motherboard is an ASRock
    >
    > To show what sort of hardward I have, here's a
    > dmesg (with the 5.4 stable kernel, which works fine):
    >
    >
    >
    > Copyright (c) 1992-2005 The FreeBSD Project.
    > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    > The Regents of the University of California. All rights reserved.
    > FreeBSD 5.4-STABLE #0: Tue Jul 26 11:12:16 EDT 2005
    > jsmith@jsmith.org:/usr/obj/usr/src/sys/MYKERNEL
    > Timecounter "i8254" frequency 1193182 Hz quality 0
    > CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2393.39-MHz 686-class CPU)
    > Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
    >
    > Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC
    >A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory
    > = 1072889856 (1023 MB)
    > avail memory = 1036140544 (988 MB)
    > ACPI APIC Table: <A M I OEMAPIC >
    > ioapic0: Changing APIC ID to 1
    > MADT: Forcing active-low polarity and level trigger for SCI
    > ioapic0 <Version 0.3> irqs 0-23 on motherboard
    > npx0: <math processor> on motherboard
    > npx0: INT 16 interface
    > acpi0: <A M I OEMRSDT> on motherboard
    > acpi0: Power Button (fixed)
    > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
    > cpu0: <ACPI CPU> port 0x530-0x537 on acpi0
    > acpi_throttle0: <ACPI CPU Throttling> on cpu0
    > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    > pci0: <ACPI PCI bus> on pcib0
    > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
    > pci1: <ACPI PCI bus> on pcib1
    > nvidia0: <GeForce4 MX 440 with AGP8X> mem
    > 0xd0000000-0xd7ffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci1
    > atapci0: <CMD 649 UDMA100 controller> port
    > 0xac00-0xac0f,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xbc00-0xbc07
    > irq 18 at device 10.0 on pci0
    > ata2: channel #0 on atapci0
    > ata3: channel #1 on atapci0
    > atapci1: <VIA 6420 SATA150 controller> port
    > 0xd800-0xd8ff,0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec0
    >0-0xec07 irq 20 at device 15.0 on pci0
    > ata4: channel #0 on atapci1
    > ata5: channel #1 on atapci1
    > atapci2: <VIA 8237 UDMA133 controller> port
    > 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
    > ata0: channel #0 on atapci2
    > ata1: channel #1 on atapci2
    > uhci0: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device
    > 16.0 on pci0
    > usb0: <VIA 83C572 USB controller> on uhci0
    > usb0: USB revision 1.0
    > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    > uhub0: 2 ports with 2 removable, self powered
    > uhci1: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device
    > 16.1 on pci0
    > usb1: <VIA 83C572 USB controller> on uhci1
    > usb1: USB revision 1.0
    > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    > uhub1: 2 ports with 2 removable, self powered
    > uhci2: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device
    > 16.2 on pci0
    > usb2: <VIA 83C572 USB controller> on uhci2
    > usb2: USB revision 1.0
    > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    > uhub2: 2 ports with 2 removable, self powered
    > uhci3: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 21 at device
    > 16.3 on pci0
    > usb3: <VIA 83C572 USB controller> on uhci3
    > usb3: USB revision 1.0
    > uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    > uhub3: 2 ports with 2 removable, self powered
    > pci0: <serial bus, USB> at device 16.4 (no driver attached)
    > isab0: <PCI-ISA bridge> at device 17.0 on pci0
    > isa0: <ISA bus> on isab0
    > pcm0: <VIA VT8237> port 0xd000-0xd0ff irq 22 at device 17.5 on pci0
    > pcm0: <Unknown AC97 Codec (id = 0x434d4983)>
    > vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd400-0xd4ff mem
    > 0xfebffc00-0xfebffcff irq 23 at device 18.0 on pci0
    > miibus0: <MII bus> on vr0
    > ukphy0: <Generic IEEE 802.3u media interface> on miibus0
    > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    > vr0: Ethernet address: 00:0b:6a:a3:e3:52
    > acpi_button0: <Power Button> on acpi0
    > fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2
    > on acpi0
    > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    > ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq
    > 3 on acpi0
    > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    > ppc0: FIFO with 16/16/9 bytes threshold
    > ppbus0: <Parallel port bus> on ppc0
    > plip0: <PLIP network interface> on ppbus0
    > lpt0: <Printer> on ppbus0
    > lpt0: Interrupt-driven port
    > ppi0: <Parallel I/O> on ppbus0
    > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    > atkbd0: <AT Keyboard> irq 1 on atkbdc0
    > kbd0 at atkbd0
    > psm0: <PS/2 Mouse> irq 12 on atkbdc0
    > psm0: model IntelliMouse Explorer, device ID 4
    > sio0: configured irq 4 not in bitmap of probed irqs 0
    > sio0: port may not be enabled
    > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
    > acpi0
    > sio0: type 16550A
    > orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xc0000-0xcffff on isa0
    > pmtimer0 on isa0
    > sc0: <System console> at flags 0x100 on isa0
    > sc0: VGA <16 virtual consoles, flags=0x300>
    > sio1: configured irq 3 not in bitmap of probed irqs 0
    > sio1: port may not be enabled
    > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    > ugen0: hewlett packard hp scanjet, rev 2.00/1.00, addr 2
    > ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 2, iclass 7/1
    > ulpt0: using bi-directional mode
    > Timecounter "TSC" frequency 2393389596 Hz quality 800
    > Timecounters tick every 10.000 msec
    > ad0: 38172MB <MAXTOR 6L040L2/A93.0500> [77557/16/63] at ata0-master UDMA133
    > ad1: 39205MB <Maxtor 6E040L0/NAR61590> [79656/16/63] at ata0-slave UDMA133
    > ata1-master: DMA limited to UDMA33, non-ATA66 cable or device
    > acd0: DVDROM <JLMS DVD-ROM LTD-166S/DS08> at ata1-master UDMA33
    > ad5: 32253MB <SAMSUNG SP0411N/TW100-11> [65531/16/63] at ata2-slave UDMA100
    > acd1: CDRW <AOPEN CD-RW CRW2440/2.06> at ata3-master PIO4
    > cd0 at ata1 bus 0 target 0 lun 0
    > cd0: <JLMS DVD-ROM LTD-166S DS08> Removable CD-ROM SCSI-0 device
    > cd0: 33.000MB/s transfers
    > cd0: Attempt to query device size failed: NOT READY, Medium not present
    > cd1 at ata3 bus 0 target 0 lun 0
    > cd1: <AOPEN CD-RW CRW2440 2.06> Removable CD-ROM SCSI-0 device
    > cd1: 16.000MB/s transfers
    > cd1: Attempt to query device size failed: NOT READY, Medium not present
    > Mounting root from ufs:/dev/ad1s1a
    > ipfw2 initialized, divert disabled, rule-based forwarding disabled,
    > default to deny, logging disabled
    > lpt0: switched to polled standard mode
    >
    > _______________________________________________
    > freebsd-current@freebsd.org mailing list
    > http://lists.freebsd.org/mailman/listinfo/freebsd-current
    > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Daniel O'Connor: "Re: 6-BETA1 iwi + wpa_supplicant fails, and sometimes silently re boots"