Re: 6.0-CURRENT SNAP004 hangs on amr (patch)

• Previous message: Andrew Turner: "Re: BSD Installer release 1"
• In reply to: John Baldwin: "Re: 6.0-CURRENT SNAP004 hangs on amr (patch)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Date: Fri, 29 Jul 2005 14:43:33 -0400
To: John Baldwin <jhb@FreeBSD.org>, Joao Barros <joao.barros@gmail.com>

At 01:18 PM 29/07/2005, John Baldwin wrote:
> > > > >Ok. Back on 6, can you try editing sys/i386/i386/io_apic.c and in the
> > > > >function ioapic_set_extint(), change the line that reads:
> > > > >
> > > > > io->io_pins[pin].io_masked = 1;
> > > > >
> > > > >to set the masked variable to 0 instead?
> > > >
> > > > Yes, it works with and without ACPI!!
> > >
> > > Ok. That change directly violates the ACPI standard. :( I need to think
> > > about this. At the very least I can add a tunable for this.
> >
> > John,
> >
> > Would it be possible to have this in BETA2?
>
>Can you try this patch? You'll need to set hw.apic.enable_extint=1 in the
>loader via loader.conf or a manual set command:

OK, just had to add
#include <sys/types.h>
#include <sys/sysctl.h>

But it works, thanks!! Just for reference, here is the full dmesg of the box.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA1 #1: Fri Jul 29 14:28:51 EDT 2005
     mdtancsa@hippo.sentex.ca:/usr/obj/usr/src/sys/hippo
WARNING: MPSAFE network stack disabled, expect reduced performance.
ACPI APIC Table: <DELL PE6350 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (500.02-MHz 686-class CPU)
   Origin = "GenuineIntel" Id = 0x672 Stepping = 2
   Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2147475456 (2047 MB)
avail memory = 2096541696 (1999 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  cpu0 (BSP): APIC ID: 3
  cpu1 (AP): APIC ID: 0
  cpu2 (AP): APIC ID: 1
  cpu3 (AP): APIC ID: 2
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE6350> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNK0> on acpi0
pci_link1: <ACPI PCI Link LNK1> on acpi0
pci_link2: <ACPI PCI Link LNK2> irq 10 on acpi0
pci_link3: <ACPI PCI Link LNK3> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNK4> on acpi0
pci_link5: <ACPI PCI Link LNK5> on acpi0
pci_link6: <ACPI PCI Link LNK6> on acpi0
pci_link7: <ACPI PCI Link LNK7> on acpi0
pci_link8: <ACPI PCI Link LNK8> irq 14 on acpi0
pci_link9: <ACPI PCI Link LNK9> on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci0: <mass storage, ATA> at device 2.1 (no driver attached)
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <bridge> at device 2.3 (no driver attached)
pci0: <display, VGA> at device 4.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
amr0: <LSILogic MegaRAID 1.51> mem 0xfe000000-0xfe3fffff irq 14 at device
8.1 on pci0
amr0: <Series 466> Firmware GH6D, BIOS 1.43, 32MB RAM
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0xfcc0-0xfcff mem 0xfeb60000-0xfeb7ffff,0xfeb40000-0xfeb5ffff irq 19 at
device 1.0 on pci3
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:0e:0c:63:ea:cf
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0xfc80-0xfcbf mem 0xfeb20000-0xfeb3ffff,0xfeb00000-0xfeb1ffff irq 18 at
device 3.0 on pci3
em1: [GIANT-LOCKED]
em1: Ethernet address: 00:0e:0c:5d:f8:ca
em1: Speed:N/A Duplex:N/A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xcc000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 34732MB (71131136 sectors) RAID 5 (optimal)
ses0 at amr0 bus 0 target 6 lun 0
ses0: <DELL 1x3 U2W SCSI BP 5.12> Fixed Processor SCSI-2 device
ses0: SAF-TE Compliant Device
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/amrd0s1a
em0: link state changed to UP

         ---Mike

_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

• Previous message: Andrew Turner: "Re: BSD Installer release 1"
• In reply to: John Baldwin: "Re: 6.0-CURRENT SNAP004 hangs on amr (patch)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]