6.0-BETA3 and Asterisk

From: Jason George (lists_at_masterplan.org)
Date: 08/31/05

  • Next message: Mikhail Teterin: "Re: installing 6.0-BETA3" 
    Date: Wed, 31 Aug 2005 13:13:22 -0600 (MDT)
To: freebsd-current@freebsd.org

    I have been messing around with 6.0-BETA3, the ZapTel driver and
    Asterisk, all running on one of my scratch machines.

    I have been running 6.0-BETA? on this machine for a few weeks now. No
    issues there. The zaptel driver appears to load fine. Starting
    up Asterisk (built from the port) causes the machine to panic.

    I've attached the full dmesg. If anyone wants me to probe some specifics
    within the debugger, please let me know.

    --Jason

    OK boot
    GDB: no debug ports present
    KDB: debugger backends: ddb
    KDB: current backend: ddb
    Copyright (c) 1992-2005 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 6.0-BETA3 #2: Tue Aug 30 13:23:07 MDT 2005

    jbg@ingenuity.resourcechain.com:/v00/opt/FreeBSD/FreeBSD-6/src/sys/i386/compile/GENERIC
    WARNING: WITNESS option enabled, expect reduced performance.
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Pentium II/Pentium II Xeon/Celeron (397.95-MHz 686-class CPU)
      Origin = "GenuineIntel" Id = 0x652 Stepping = 2

    Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
    real memory = 134217728 (128 MB)
    avail memory = 121765888 (116 MB)
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    cpu0 on motherboard
    pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
    pir0: <PCI Interrupt Routing Table: 5 Entries> on motherboard
    pci0: <PCI bus> on pcib0
    agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
    0x44000000-0x47ffffff at device 0.0 on pci0
    pcib1: <PCI-PCI bridge> at device 1.0 on pci0
    pci1: <PCI bus> on pcib1
    pci1: <display, VGA> at device 0.0 (no driver attached)
    fxp0: <Intel 82558 Pro/100 Ethernet> port 0x2000-0x201f mem
    0x40200000-0x40200fff,0x40100000-0x401fffff irq 11 at device 10.0 on pci0
    miibus0: <MII bus> on fxp0
    inphy0: <i82555 10/100 media interface> on miibus0
    inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    fxp0: Ethernet address: 00:08:c7:c3:64:df
    pci0: <simple comms> at device 14.0 (no driver attached)
    isab0: <PCI-ISA bridge> at device 20.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <Intel PIIX4 UDMA33 controller> port
    0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2040-0x204f at device 20.1 on pci0
    ata0: <ATA channel 0> on atapci0
    ata1: <ATA channel 1> on atapci0
    uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2020-0x203f irq 11
    at device 20.2 on pci0
    uhci0: [GIANT-LOCKED]
    usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
    usb0: USB revision 1.0
    uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    piix0: <PIIX Timecounter> port 0xfc00-0xfc0f at device 20.3 on pci0
    Timecounter "PIIX" frequency 3579545 Hz quality 0
    pmtimer0 on isa0
    orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe7fff on isa0
    atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
    on isa0
    fdc0: [FAST]
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
    ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/8 bytes threshold
    ppbus0: <Parallel port bus> on ppc0
    plip0: <PLIP network interface> on ppbus0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x100>
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 16550A, console
    sio1 at port 0x2f8-0x2ff irq 3 on isa0
    sio1: type 16550A
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    unknown: <PNP0401> can't assign resources (port)
    unknown: <PNP0501> can't assign resources (port)
    unknown: <PNP0501> can't assign resources (port)
    unknown: <PNP0700> can't assign resources (port)
    unknown: <PNP0c01> can't assign resources (memory)
    unknown: <PNP0303> can't assign resources (port)
    unknown: <PNP0c02> can't assign resources (port)
    unknown: <PNP0c02> can't assign resources (port)
    Timecounter "TSC" frequency 397949172 Hz quality 800
    Timecounters tick every 1.000 msec
    ad0: 152627MB <Seagate ST3160023A 3.06> at ata0-master UDMA33
    Trying to mount root from ufs:/dev/ad0s1a
    WARNING: / was not properly dismounted
    /: mount pending error: blocks 72 files 25
    Loading configuration files.
    kenv: unable to get dumpdev
    kernel dumps on /dev/ad0s1b
    Entropy harvesting: interrupts ethernet point_to_point kickstart.
    swapon: adding /dev/ad0s1b as swap device
    Starting file system checks:
    /dev/ad0s1a: INCORRECT BLOCK COUNT I=1177725 (4 should be 0) (CORRECTED)
    /dev/ad0s1a: INCORRECT BLOCK COUNT I=1177727 (4 should be 0) (CORRECTED)
    /dev/ad0s1a: UNREF FILE I=1177721 OWNER=root MODE=100644
    /dev/ad0s1a: SIZE=0 MTIME=Aug 31 06:58 2005 (CLEARED)
    /dev/ad0s1a: UNREF FILE I=1177722 OWNER=root MODE=100644
    /dev/ad0s1a: SIZE=0 MTIME=Aug 31 12:58 2005 (CLEARED)
    /dev/ad0s1a: UNREF FILE I=1177723 OWNER=root MODE=140755
    /dev/ad0s1a: SIZE=0 MTIME=Aug 31 12:58 2005 (CLEARED)
    /dev/ad0s1a: UNREF FILE I=1177724 OWNER=root MODE=140755
    /dev/ad0s1a: SIZE=0 MTIME=Aug 31 12:58 2005 (CLEARED)
    /dev/ad0s1a: UNREF FILE I=1177725 OWNER=root MODE=100644
    /dev/ad0s1a: SIZE=0 MTIME=Aug 31 12:58 2005 (CLEARED)
    /dev/ad0s1a: UNREF FILE I=1177726 OWNER=root MODE=140755
    /dev/ad0s1a: SIZE=0 MTIME=Aug 31 12:58 2005 (CLEARED)
    /dev/ad0s1a: UNREF FILE I=1177727 OWNER=root MODE=100644
    /dev/ad0s1a: SIZE=0 MTIME=Aug 31 12:58 2005 (CLEARED)
    /dev/ad0s1a: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
    /dev/ad0s1a: SUMMARY INFORMATION BAD (SALVAGED)
    /dev/ad0s1a: BLK(S) MISSING IN BIT MAPS (SALVAGED)
    /dev/ad0s1a: 21720 files, 471895 used, 4605184 free (5576 frags, 574951
    blocks, 0.1% fragmentation)
    /dev/ad0s1d: DEFER FOR BACKGROUND CHECKING
    WARNING: /v00 was not properly dismounted
    Setting hostname: ingenuity.resourcechain.com.
    fxp0: link state changed to UP
    fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
            options=8<VLAN_MTU>
            inet 192.168.4.3 netmask 0xffffff00 broadcast 192.168.4.255
            inet6 fe80::208:c7ff:fec3:64df%fxp0 prefixlen 64 tentative scopeid
    0x1
            ether 00:08:c7:c3:64:df
            media: Ethernet autoselect (100baseTX <full-duplex>)
            status: active
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
            inet 127.0.0.1 netmask 0xff000000
            inet6 ::1 prefixlen 128
            inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
    add net default: gateway 192.168.4.8
    Additional routing options:.
    Starting devd.
    Mounting NFS file systems:.
    Creating and/or trimming log files:.
    Starting syslogd.
    Checking for core dump on /dev/ad0s1b...
    savecore: unable to open bounds file, using 0
    savecore: no dumps found
    Starting rpcbind.
    NFS access cache time=2
    ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
    a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
    Starting mountd.
    Starting nfsd.
    Starting statd.
    Starting lockd.
    Starting usbd.
    Starting local daemons:.
    Updating motd.
    Configuring syscons: blanktime.
    Starting sshd.
    Starting sendmail.
    Initial i386 initialization:.
    Additional ABI support:.
    Starting cron.
    Local package initialization:Starting asterisk.
    Starting rsyncd.
    Zapata Telephony Interface Registered on major 196
    ZapTel device: vendor=e159 device=1 subvendor=8086
    wcfxo0: <Generic Clone> port 0x2400-0x24ff mem 0x42000000-0x42000fff irq
    11 at device 14.0 on pci0
    ZapTel Attach for wcfxo0: deviceID : 0xe159
    wcfxo0: [GIANT-LOCKED]
    lock order reverswcfxo: DAA mode is 'FCC'
    Found a Wildcard FXO: Generic Clone
    ZapTel device loaded.
    al
     1st 0xc12df4b4 sleep mtxpool (sleep mtxpool) @ kern/kern_descrip.c:2275
     2nd 0xc15c582c filedesc structure (filedesc structure) @
    kern/kern_descrip.c:2276
    KDB: stack backtrace:
    kdb_backtrace(0,ffffffff,c09331f8,c0933ae0,c08bdba4) at kdb_backtrace+0x29
    witness_checkorder(c15c582c,9,c08562a4,8e4) at witness_checkorder+0x564
    _mtx_lock_flags(c15c582c,0,c085629b,8e4) at _mtx_lock_flags+0x5b
    dupfdopen(c15c3780,c15c5800,b,c,3) at dupfdopen+0x310
    kern_open(c15c3780,28403e6a,0,3,0) at kern_open+0x134
    open(c15c3780,ccaaed04,3,1,246) at open+0x1a
    syscall(3b,3b,3b,80d7000,0) at syscall+0x22f
    Xint0x80_syscall() at Xint0x80_syscall+0x1f
    --- syscall (5, FreeBSD ELF32, open), eip = 0x282c3797, esp = 0xbfbfe7bc,
    ebp = 0xbfbfe7e8 ---

    Fatal trap 12: page fault while in kernel mode
    cpuid = 0; apic id = 00
    fault virtual address = 0x10
    fault code = supervisor read, page not present
    instruction pointer = 0x20:0xc0616467
    stack pointer = 0x28:0xccaa8b90
    frame pointer = 0x28:0xccaa8bf4
    code segment = base 0x0, limit 0xfffff, type 0x1b
                            = DPL 0, pres 1, def32 1, gran 1
    processor eflags = interrupt enabled, resume, IOPL = 0
    current process = 458 (asterisk)
    [thread pid 458 tid 100087 ]
    Stopped at closef+0x23: cmpl $0,0x10(%edi)
    db> trace
    Tracing pid 458 tid 100087 td 0xc15c3480
    closef(c1514510,c15c3480) at closef+0x23
    fdfree(c15c3480,c15c4d94,0,c085ccf7,6b3) at fdfree+0x473
    exit1(c15c3480,100,ccaa8d30,c07f15fb,c15c3480) at exit1+0x3f6
    exit1(c15c3480,ccaa8d04,1,0,296) at exit1
    syscall(3b,3b,3b,14,80bdf20) at syscall+0x22f
    Xint0x80_syscall() at Xint0x80_syscall+0x1f
    --- syscall (1, FreeBSD ELF32, sys_exit), eip = 0x282c1433, esp =
    0xbfbfeacc, ebp = 0xbfbfeae8 ---
    db>

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Mikhail Teterin: "Re: installing 6.0-BETA3"

    Relevant Pages