Re: modem card is not recognized anymore

From: M. Warner Losh (imp_at_bsdimp.com)
Date: 09/28/05

  • Next message: Bjoern A. Zeeb: "Re: LOR: if_ath vs vm_map" 
    Date: Wed, 28 Sep 2005 09:35:38 -0600 (MDT)
To: ume@mahoroba.org

    In message: <yge7jd14pia.wl%ume@mahoroba.org>
                Hajimu UMEMOTO <ume@mahoroba.org> writes:
    : Recently, I upgraded my laptop to latest RELENG_6. Then, I realized
    : that my modem card (SII MC-P300) is not recognized anymore. When I
    : inserted the card into the PCMCIA slot, the kernel bacame stacked.
    : Then I removed the card from the slot, the kernel bacame alive again
    : with following dmesg output:
    :
    : pccard0: Card has no functions!
    : cbb0: PC Card card activation failed.
    :
    : The card is still recognized fine with 6.0-BETA3 kernel. IIRC, the
    : card was recognized fine with BETA4 kernel. However, since I've lost
    : BETA4 kernel, I cannot test with BETA4, sorry.
    :
    : Any idea?

    Can you send me a dmesg from a boot -v from BETA3 and RELENG_6?

    Warner
    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"

  • Next message: Bjoern A. Zeeb: "Re: LOR: if_ath vs vm_map"

    Relevant Pages

    • Re: SUSE 10
      ... > Fritz Box SL Wlan and get an IP Adress, ... or the Netgear MA301 PCI Card. ... kernel source for the running kernel available as you will be building a ... Configuration successful. ...
      (alt.os.linux.suse)
    • allocation failures with CBQ bandwidth limiting & high net use (was Re: Filesystem kernel hangup
      ... limiting, queuing and prioritization, *and* high network use (using ... "full_kernel_output" file for an idea of what kernel messages I was ... My IRQ is shared with that above TV card, ... kernel messages for about two hours from boot to crash). ...
      (Linux-Kernel)
    • athlon-xp + fakeraid regression
      ... The build completes fine, the kernel boots fine, the machine will seem to be fine as long as it remains quiescent. ... At the beginning, just after hitting enter on the make command, one of the ad4 disk light goes on solid for several seconds. ... There is a well known thing where these cheap pata fakeraid cards will try to do ata133 if the drive says it can, when really, even if he drives are new ata133 drives and the cables are new and short and shielded, you still shouldn't try to do ata133 since the spec is too tight and you'll just get bit errors or other failures. ... The fix is use ata100 somehow, either by disabling dma entirely in loader.conf (since you have no more selective option there, and the raid card bios never has an option for controlling pio/dma mode like motherboard bios's have) and then use atacontrol in rc.early to set udma5, or by using disks that can only do ata100 and only advertise ata100 to the controller. ...
      (freebsd-current)
    • Re: Kdesud locking up, JMicron card reader not working, USB 3 Controller stops working after resumin
      ... especially when running Synaptics (but it happened ... You mean that when you insert a card, ... should go away in the next kernel releases. ... There are already some bug reports opened for this problem in Debian BTS ...
      (Debian-User)
    • Re: modem works in sarge but not etch or lenny
      ... When I ran sarge with the modem card physically removed, ... I don't really understand the structure of the kernel so I don't ... It worked in Sarge but I have not been able to get it to work in my ...
      (Debian-User)