iwi driver


hello all,

since the last update dated
Sat Apr 29, (on current),
the iwi driver does not work:
cannot change any achannel, and no association!
the old version of the driver works.

...
;* Copyright Sam Leffler */

previous:
/* $FreeBSD: src/sys/dev/iwi/if_iwi.c,v 1.27 2006/01/29 12:03:03 damien Exp $ */

the nic is seated onboard of a s5 Sony laptop.
dmesg:
...
firmware_get: failed to load firmware image iwi_bss
iwi0: could not load firmware

...

firmware_get: failed to load firmware image iwi_bss
iwi0: could not load firmware

pciconf -lv
iwi0@pci6:11:0: class=0x028000 card=0x27538086 chip=0x42208086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/Wireless 2200BG Network Connection'
class = network

Please can you tell me something to do about this?

thanks

rmgls
rmgls@xxxxxxxxxx

_______________________________________________
freebsd-current@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: iwi driver
    ... the iwi driver does not work: ... failed to load firmware image iwi_bss ... iwi0: could not load firmware ... If all iwi0 settings are done with only one ifconfig call, ...
    (freebsd-current)
  • Re: iwi driver
    ... the iwi driver does not work: ... failed to load firmware image iwi_bss ... iwi0: could not load firmware ... Most of the time a few ifconfig iwi0 down/up runs get it ...
    (freebsd-current)
  • iwi0: could not load firmware
    ... failed to load firmware image iwi_bss ... iwi0: could not load firmware ... This is my current kldstat-output: ...
    (freebsd-stable)
  • Re: iwi0: could not load firmware
    ... failed to load firmware image iwi_bss ... iwi0: could not load firmware ...
    (freebsd-stable)