Re: bigdisk and scsi_da

Rong-en Fan wrote:
It seems to me that scsi_da.c reports the wrong size:

da1 at mpt0 bus 0 target 0 lun 0
da1: <SILVER TN-6212S-U4D 347G> Fixed Direct Access SCSI-5 device
da1: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged
Queueing Enabled
da1: 0MB (1 0 byte sectors: 0H 0S/T 0C)

While geom shows the right one:

Geom name: da1
Providers:
1. Name: da1
Mediasize: 4991221760000 (4.5T)
Sectorsize: 512
Mode: r0w0e0
fwsectors: 63
fwheads: 255


XPT_CALC_GEOMETRY is failing when the disk is being probed. This
is likely a problem with the MPT driver. However, I'd need some
time to think through all of the code in order to be sure.

Scott
_______________________________________________
freebsd-current@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: bigdisk and scsi_da
    ... Rong-en Fan wrote: ... While geom shows the right one: ... Geom name: da1 ... fwheads: 255 ...
    (freebsd-current)
  • bigdisk and scsi_da
    ... It seems to me that scsi_da.c reports the wrong size: ... While geom shows the right one: ... Geom name: da1 ... Mediasize: 4991221760000 ...
    (freebsd-current)
  • Re: bigdisk and scsi_da
    ... Rong-en Fan wrote: ... > It seems to me that scsi_da.c reports the wrong size: ... > While geom shows the right one: ... > Geom name: da1 ...
    (freebsd-current)
  • Re: bigdisk and scsi_da
    ... On 12/20/06, Scott Long wrote: ... > It seems to me that scsi_da.c reports the wrong size: ... > While geom shows the right one: ... > Geom name: da1 ...
    (freebsd-current)
  • RE: 3Ware 9500 and disklabel
    ... > To: Vinod Kashyap ... Try using whatever method you used to boot at the time of installing ... > Also, when the current installation has booted, geom disk ... > fwheads: 16 ...
    (freebsd-current)