A stuck system

All:

Ok my P4D machine is sitting hung... its in that
state I mentioned previously.

It will not respond to network input on the em0 card... i.e.
it won't answer pings..

I have not tried the new msk0 device... its not configured up :-(

Now, I know from past experience if I hit any key... it will
start up again.. give out various warnings and timeouts.. sometimes
a "clock ran backwards".. possibly.. and then
start working fine again..

Is there anything I can try to get some information so we can
figure whats going on...

It could be a hardware problem... don't know... but
it might not be.. it does look like a lost interupt... but
thats just a stab in the dark guess..

Suggestions on anything I can try to get info would be welcome.

I can do a kernel dump of course but by the time I get ctl-alt-esc
in.. the machine will be running not in the hung state :-(

thoughts anyone ??

R
--
Randall Stewart
NSSTG - Cisco Systems Inc.
803-345-0369 <or> 803-317-4952 (cell)
_______________________________________________
freebsd-current@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Dead graphics card
    ... I came back to my computer to find it had hung with a completely screwed ... convenient for me to test the GF4 card in another machine at the moment. ... at the relative lack of dust on the graphics card heatsink/fan (compared to ... planning a major upgrade with a move to PCIe later this year. ...
    (uk.comp.homebuilt)
  • Re: Hanging ext3 or USB, linux 2.6.16-rc6-mm2
    ... I have a small machine that boot off a compactflash card. ... from that machine to a new 4GB card in a usb cardreader. ... When scp had filled the card to 71% of capacity, ... you would not see and similar hung. ...
    (Linux-Kernel)
  • Re: Re:DEVLDR message
    ... Hi I gave it a go but the darned thing hung up half way through, ... system restore and reloaded the software. ... > Since you had this error prior to installing your new one, ... > you may have some components left over from the old card. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: joke of the day...
    ... >>> card out... ... >>> hung up. ... > done that - chaps for guys does it every time. ... Prev by Date: ...
    (rec.boats)