Re: VIA VT8237R+ chipset

Maybe it's not this controller which is the cause of all my problems, but I got
this at startup each time I use this motherboard (HDD works perfect on an other
motherboard):

_________
FreeBSD 5.4-RELEASE #2: Mon May 14 11:13:21 CEST
...
atapci0: <VIA 6420 SATA150 controller> port
0xf700-0xf70f,0xf800-0xf803,0xf900-0xf907,0xfa00-0xfa03,0xfb00-0xfb07 irq 20 at
device 15.0 on pci0
...
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
...
atapci1: <VIA 8237 UDMA133 controller> port
0xf600-0xf60f,0x376,0x170-0x177,0x3fd6,0x1f0-0x1f7 at device 15.1 on pci0
...
ata0: channel #0 on atapci1
...
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
...
Timecounter "TSC" frequency 1499842713 Hz quality 800
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=0
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=0
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=0
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=0
Mounting root from ufs:/dev/ad0s1a
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6

Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input

mountroot>

________________

I got, on my motherboard: VIA VT8237R+ chipset and CN700. The CN700 controls
SATA raid and the VT8237R+ controls EIDE. As my disk is connected via EIDE, I
supposed that the problem came from the VT8237R+ chipset

Cheers

Alex
_______________________________________________
freebsd-current@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: Page and Images not found on Localhost
    ... I didn't know that even images could be declared as server controls. ... which may not have been declared as a server control. ... I designated the "project" folder as an application in IIS. ... is the root for anything under it. ...
    (microsoft.public.dotnet.framework.aspnet)
  • 3ware 9500S problem in newly updated 4.x box.
    ... On reboot, it failed to find da0, so it couldn't mount root. ... CPU: IntelXeonCPU 2.80GHz ... FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs ... pci0: <PCI bus> on pcib0 ...
    (freebsd-stable)
  • [READ_DMA again]
    ... npx0: on motherboard ... pci0: <PCI bus> on pcib0 ... atapci0: ... can't assign resources (port) ...
    (freebsd-current)
  • RE: 3ware 9500S problem in newly updated 4.x box.
    ... > On reboot, it failed to find da0, so it couldn't mount root. ... > haven't tried this without SMP. ... > SMP: AP CPU #2 Launched! ...
    (freebsd-stable)
  • Re: UserControls im Unterverzeichnis
    ... wenn ich dies Controls in einem Unterverzeischnis benutzen will ... Da Controls eine rein serverseitige Angelegenheit ... Und "images" ist ein Pfad im Root Deiner Anwendung? ...
    (microsoft.public.de.german.entwickler.dotnet.asp)