Re: Slow networkperformance in current?

On 2007-07-16 at 16:44, Kip Macy wrote:
I didn't get any attachments.

Guess it's about time to get some sleep soon...
Here they are.
--
Ståle Kristoffersen
staalebk@xxxxxxxxxx
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #10: Mon Jul 16 18:40:28 CEST 2007
root@fs:/usr/obj/usr/src/sys/FS
MPTable: <OEM00000 PROD00000000>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2856.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf47 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,CX16,xTPR>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1072562176 (1022 MB)
avail memory = 1036025856 (988 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 4
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
cpu1 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <MPTable PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xf4000000-0xf7ffffff,0xd8000000-0xdfffffff,0xfa000000-0xfaffffff irq 16 at device 0.0 on pci1
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <PCI bus> on pcib2
pcib3: <MPTable PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <PCI bus> on pcib3
re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0x7e00-0x7eff mem 0xfd3ff000-0xfd3fffff irq 18 at device 0.0 on pci3
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:50:8d:95:d8:83
re0: [FILTER]
pcib4: <MPTable PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <PCI bus> on pcib4
atapci0: <SiI 3132 SATA300 controller> port 0xcf00-0xcf7f mem 0xfddff000-0xfddff07f,0xfddf8000-0xfddfbfff irq 19 at device 0.0 on pci4
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pcib5: <MPTable PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci5: <PCI bus> on pcib5
re1: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xbe00-0xbeff mem 0xfdbff000-0xfdbfffff irq 16 at device 0.0 on pci5
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S media interface> PHY 1 on miibus1
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re1: Ethernet address: 00:50:8d:95:d8:84
re1: [FILTER]
pcib6: <MPTable PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci6: <PCI bus> on pcib6
atapci1: <JMicron JMB363 SATA300 controller> port 0xaf00-0xaf07,0xae00-0xae03,0xad00-0xad07,0xac00-0xac03,0xab00-0xab0f mem 0xfd9fe000-0xfd9fffff irq 17 at device 0.0 on pci6
atapci1: [ITHREAD]
atapci1: AHCI Version 01.00 controller with 2 ports detected
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 2> on atapci1
ata6: [ITHREAD]
pcib7: <PCI-PCI bridge> at device 30.0 on pci0
pci7: <PCI bus> on pcib7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel ICH8 SATA300 controller> port 0xfa00-0xfa07,0xf900-0xf903,0xf800-0xf807,0xf700-0xf703,0xf600-0xf60f,0xf500-0xf50f irq 19 at device 31.2 on pci0
atapci2: [ITHREAD]
ata7: <ATA channel 0> on atapci2
ata7: [ITHREAD]
ata8: <ATA channel 1> on atapci2
ata8: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci3: <Intel ICH8 SATA300 controller> port 0xf300-0xf307,0xf200-0xf203,0xf100-0xf107,0xf000-0xf003,0xef00-0xef0f,0xee00-0xee0f irq 19 at device 31.5 on pci0
atapci3: [ITHREAD]
ata9: <ATA channel 0> on atapci3
ata9: [ITHREAD]
ata10: <ATA channel 1> on atapci3
ata10: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd27ff,0xef000-0xeffff pnpid ORM0000 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
Timecounters tick every 1.000 msec
ad8: 305245MB <Seagate ST3320620AS 3.AAC> at ata4-master SATA300
ad10: 381554MB <Seagate ST3400620AS 3.AAK> at ata5-master SATA150
ad12: 305245MB <Seagate ST3320620A 3.AAE> at ata6-master UDMA100
ad14: 305245MB <Seagate ST3320620AS 3.AAC> at ata7-master SATA150
ad15: 305245MB <Seagate ST3320620AS 3.AAC> at ata7-slave SATA150
ad16: 305245MB <Seagate ST3320620AS 3.AAE> at ata8-master SATA150
ad17: 381554MB <Seagate ST3400620AS 3.AAK> at ata8-slave SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad10s1a
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS filesystem version 6
ZFS storage pool version 6
#

cpu I686_CPU
ident FS

# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.

#options SCHED_ULE # ULE scheduler
options SCHED_4BSD # 4BSD scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options STOP_NMI # Stop CPUS using NMI instead of IPI

# To make an SMP kernel, the next two lines are needed
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC

# Bus support.
device eisa
device pci

# Floppy drives
device fdc

# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering

# SCSI Controllers
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
device ahd # AHA39320/29320 and onboard AIC79xx devices
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
device amd # AMD 53C974 (Tekram DC-390(T))
device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
device trm # Tekram DC395U/UW/F DC315U adapters

device adv # Advansys SCSI adapters
device adw # Advansys wide SCSI adapters
device aha # Adaptec 154x SCSI adapters
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device bt # Buslogic/Mylex MultiMaster SCSI adapters

device ncv # NCR 53C500
device nsp # Workbit Ninja SCSI-3
device stg # TMC 18C30/18C50

# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
device amr # AMI MegaRAID
device arcmsr # Areca SATA II RAID
device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device ciss # Compaq Smart RAID 5*
device dpt # DPT Smartcache III, IV - See NOTES for options
device hptmv # Highpoint RocketRAID 182x
device rr232x # Highpoint RocketRAID 232x
device iir # Intel Integrated RAID
device ips # IBM (Adaptec) ServeRAID
device mly # Mylex AcceleRAID/eXtremeRAID
device twa # 3ware 9000 series PATA/SATA RAID

# RAID controllers
device aac # Adaptec FSA RAID
device aacp # SCSI passthrough for aac (requires CAM)
device ida # Compaq Smart RAID
device mfi # LSI MegaRAID SAS
device mlx # Mylex DAC960 family
device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse

device kbdmux # keyboard multiplexer

device vga # VGA video card driver

device splash # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device sc

device agp # support several AGP chipsets

# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus

# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
device uart # Generic UART driver

# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device puc

# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
device ixgb # Intel PRO/10GbE Ethernet Card
device le # AMD Am7900 LANCE and Am79C9xx PCnet
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device lge # Level 1 LXT1001 gigabit Ethernet
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
device nge # NatSemi DP83820 gigabit Ethernet
device nve # nVidia nForce MCP on-board Ethernet Networking
device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device stge # Sundance/Tamarack TC9021 gigabit Ethernet
device ti # Alteon Networks Tigon I/II gigabit Ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs. pccard NICs included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
device ep # Etherlink III based cards
device fe # Fujitsu MB8696x based cards
device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
device sn # SMC's 9000 series of Ethernet chips
device xe # Xircom pccard Ethernet

# Wireless NIC cards
device wlan # 802.11 support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device an # Aironet 4500/4800 802.11 wireless NICs.
device ath # Atheros pci/cardbus NIC's
device ath_hal # Atheros HAL (Hardware Access Layer)
device ath_rate_sample # SampleRate tx rate control for ath
device awi # BayStack 660 and others
device ral # Ralink Technology RT2500 wireless NICs.
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter

# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Ethernet, requires miibus
device aue # ADMtek USB Ethernet
device axe # ASIX Electronics USB Ethernet
device cdce # Generic USB over Ethernet
device cue # CATC USB Ethernet
device kue # Kawasaki LSI USB Ethernet
device rue # RealTek RTL8150 USB Ethernet

# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
_______________________________________________
freebsd-current@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Panic with amr and 5.4-PRERELEASE
    ... I have a FreeBSD bi-processor box with amr device in FreeBSD ... 'tr /dev/cuaa1' to connect to a different port ... # Floating point support - do not disable. ... pci0: <PCI bus> on pcib0 ...
    (freebsd-current)
  • Panic with amr and 5.4-PRERELEASE
    ... I have a FreeBSD bi-processor box with amr device in FreeBSD ... 'tr /dev/cuaa1' to connect to a different port ... # Floating point support - do not disable. ... pci0: <PCI bus> on pcib0 ...
    (freebsd-stable)
  • usb devices dont "wake up"
    ... Copyright 1992-2008 The FreeBSD Project. ... <ACPI PCI bus> on pcib0 ... port ... soft updates support ...
    (freebsd-questions)
  • FreeBSD 6.0 kernel panic
    ... FreeBSD 6.0, although that is not necessary for FreeBSD 5.4. ... pci0: <PCI bus> on pcib0 ... <Parallel port bus> on ppc0 ...
    (comp.unix.bsd.freebsd.misc)
  • Re: new benchmarks. WAS: FreeBSD MySQL still WAY slower than Linux
    ... MySQL has very frequent use of queries of the system time and is well known in FreeBSD to be slower because its more expensive to call compared to Linux, ... 1000 | grep select_index; done; date ... pci0: <PCI bus> on pcib0 ... ppc0: parallel port not found. ...
    (freebsd-performance)