Re: nfe(4) not working on asus m2n32sli-deluxe

On Fri, Aug 31, 2007 at 02:58:54PM -0300, Mario Ferreira wrote:
asus m2n32sli-deluxe wifi edition but I had some issues:

1) on board wlan adapter RTL8187_Wireless not supported
2) on board lan adapter NForce 590 SLI MCP does not work

The lack of support for RTL8187_Wireless is not a problem for now.
However, the NForce 590 SLI MCP Gigabit adapter is an issue.

Hi,

I just bought the exact same motherboard as you,
and it works great. I do not have any issues with the
Gigabit adapter.

nfe0@pci0:16:0: class=0x068000 card=0xcb841043 chip=0x037310de rev=0xa2 hdr=0x00
nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
ether 00:1b:fc:62:b3:68
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active

There are some BIOS settings related to "LAN Cable Status" that you
might want to fiddle with.

If you have further problems, you can follow up with me directly.

--
Craig Rodrigues
rodrigc@xxxxxxxxxxxxxx

nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23 at device 16.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02a000
nfe0: Reserved 0x100 bytes for rid 0x18 type 3 at 0xfe029000
nfe0: Reserved 0x10 bytes for rid 0x1c type 3 at 0xfe028000
nfe0: attempting to allocate 8 MSI-X vectors (8 supported)
nfe0: using IRQs 256-263 for MSI-X
nfe0: Using 8 MSIX messages
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: bpf attached
nfe0: Ethernet address: 00:1b:fc:62:b3:68
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem 0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20 at device 17.0 on pci0
nfe1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe027000
nfe1: Reserved 0x100 bytes for rid 0x18 type 3 at 0xfe026000
nfe1: Reserved 0x10 bytes for rid 0x1c type 3 at 0xfe025000
nfe1: attempting to allocate 8 MSI-X vectors (8 supported)
nfe1: using IRQs 264-271 for MSI-X
nfe1: Using 8 MSIX messages
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus1
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe1: bpf attached
nfe1: Ethernet address: 00:1b:fc:62:be:56
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
_______________________________________________
freebsd-current@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: ANN: Sequel 0.4.1 Released
    ... error-handling in worker threads, support for DISTINCT ON clauses, ... better support for database access using DBI and automatic adapter ... Sequel is a lightweight ORM library for Ruby. ... Improved error-handling for worker threads. ...
    (comp.lang.ruby)
  • Re: nfe(4) not working on asus m2n32sli-deluxe
    ... on board wlan adapter RTL8187_Wireless not supported ... on board lan adapter NForce 590 SLI MCP does not work ... The lack of support for RTL8187_Wireless is not a problem for now. ... detects the media settings. ...
    (freebsd-current)
  • Re: Any leaks on the Pentax K1D yet?
    ... GPS support ... ionic field dust repulsion on low pass filter ... K, KA,KA/P,KA/F and M42 with adapter ... I like the "Still picture mode" at the end like it was an after thought;) ...
    (rec.photo.digital.slr-systems)
  • Re: problems with .pdb file
    ... <<my machine doesn't have the necessary D3D support adapter to run your ... this is amazing to me considering how important screen graphics ... entry level graphics card compatible with DX90c. ... > adapter to run your program,: ...
    (microsoft.public.vc.debugger)
  • Re: acpi_bus_number: cant get _ADR issue on Intel D923XCV Motherboard.
    ... > I will plug a pci card in there for now, but this is not quite the ... Your network device just isn't supported yet: ... It may be very trivial to add support for it. ... adapter is supposed to be a 10/100 adapter or a 10/100/1000? ...
    (freebsd-stable)