Re: [ANNOUNCEMENT] Wiki for discussing P35/IHC9(R)/SATA issues set up

Jeremy Chadwick wrote:
On Tue, Nov 06, 2007 at 03:31:35AM -0500, Aryeh M. Friedman wrote:

Xin LI wrote:

Yes (so that you get the correct speed of ICH9, ironically I have
misunderstood the spec). I am working on a new patch.

The speeds are still incorrect (150 instead of 300)


According to the thread and Wiki data I see, you're complaining that the
following two devices on your SATA bus are SATA150 when they should be
SATA300, correct?

Master: ad8 <ST3500630AS/3.AAE> Serial ATA v1.0
Master: acd0 <TSSTcorpCD/DVDW SH-S183L/SB01> Serial ATA v1.0


yes btw due to god knows what reason the patch renumbered ad8 to ad6
1) Have you verified that the SATA150-limiting jumper on your Seagate
drive has been removed? SATA300 drives from Seagate come from the
factory with that jumper connected, limiting the drive to SATA150.


I will check but:

1. I was unaware of this "feature"
2. I didn't see any jumpers when I installed it
2) Do you happen to be using a PATA-to-SATA adapter on the DVD drive?


It is native SATA (300)
3) If No to #2, are you sure that the ICH9 does SATA300 with ATAPI
devices? Does the mainboard BIOS even support it for ATAPI?


Mobo has ATAPI I am not sure about the IHC issue though... will look it
up and get back to you.


--
Aryeh M. Friedman
Developer, not business, friendly
http://www.flosoft-systems.com

_______________________________________________
freebsd-current@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@xxxxxxxxxxx"

Relevant Pages