Re: Any successful installs on a Broadcom HT1000 chipset?


--- Travis Mikalson <bofh@xxxxxxxxxxxxx> wrote:

Barney Cordoba wrote:
--- Mike Tancsa <mike@xxxxxxxxxx> wrote:

At 02:26 AM 11/29/2007, Andrey V. Elsukov wrote:

May be here is different HW revisions? You have
an
old revision and
now people with this bug have a new revision?
I don't see in the this thread any verbose dmesg
or
pciconf outputs.
So, people, who have problems and who don't have
it, can you show
your `pciconf -l`?
My board works well and has since the 6.1 days
>
I think we've established that 6.x works and 7.x
doesn't.

Barney

Not mine, I'm afraid.

See post from yesterday where I tried 6.2 and 6.3 on
my Tyan S3950 and
it worked poorly.

Not sure what the major difference between one
HT1000 board and another
could be, but mine seems to be in the most-afflicted
category. I count
myself lucky that it works as well as it does with
RELENG_7 so long as I
avoid the PCI-X slot or the on-board SATA.

It seems to me it makes more sense to use a different
MB than avoiding the slot and not using SATA. One of
the attractions of the HT1000 is the SATA performance.

Are you sending Soren a MB, or what is the status of
that?

Barney


____________________________________________________________________________________
Be a better sports nut! Let your teams follow you
with Yahoo Mobile. Try it now. http://mobile.yahoo.com/sports;_ylt=At9_qDKvtAbMuh1G1SQtBI7ntAcJ
_______________________________________________
freebsd-current@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: Any successful installs on a Broadcom HT1000 chipset?
    ... RELENG_7 so long as I avoid the PCI-X slot or the on-board SATA. ... I consider the broken status temporary and the SiI3114 controllers a temporary workaround. ... Tyan S3950 kit, he was unable to reproduce the issue on his specific HT1000-based hardware. ...
    (freebsd-current)
  • Re: motherboard SATA to external hard drive eSATA
    ... I have an ASUS board with 2 on-board SATA ... Assuming it is - if that external enclosure has the eSATA port you describe, ... one end having the eSATA connector ...
    (microsoft.public.windowsxp.hardware)