Re: HEADSUP: uath(4) has been committed.

I have a uath device the Engenius NUB-362-EXT, it will not attach to
the uath driver
it says ugen7.3: <Atheros Communications Inc> at usbus7

I should note that this device attaches in OpenBSD 4.x
I am running FreeBSD 8 -CURRENT as of 10 hours ago, I do not know the
usb2 equivalent of usbdevs -v

I am confused as to why this device will not attach to uath, I have
the driver loaded with kldload if_uath

I do not know if this will help, but here is output from OpenBSD 4.5
after you plugin the device I get:

uath0 at uhub0 port 5 "Atheros Communications Inc AR5523" rev 2.00/0.01 addr 2
uath0 detached
uath0 at uhub0 port 5 "Atheros Communications Inc AR5523" rev 2.00/0.01 addr 2
uath0: MAC/BBP AR5523, RF AR2112, address 00:02:6f:3d:66:58

usbdevs -v
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 addr 2: high speed, power 500 mA, config 1, AR5523(0x0001),
Atheros Communications Inc(0x0cf3), rev 0.01, iSerialNumber 1.0
port 6 powered
port 7 powered
port 8 powered


Sam Fourman Jr.
_______________________________________________
freebsd-current@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: patch for sysfs in the cyclades driver
    ... If I can attach this data to the port, ... > will have to test it (I'm grateful for you, Scott). ... send the line "unsubscribe linux-kernel" in ...
    (Linux-Kernel)
  • Re: Printer driver problem in a mixed OS environment (XP and NT)
    ... Ok, you are right, I can attach the debugger on the XP side to the spooler. ... But where to attach on the NT side to find the 'missing port' problem? ... >> I have developed a kernel mode printer driver which works ...
    (microsoft.public.development.device.drivers)
  • Re: Embedded switch instead of stadard PHY
    ... if_mge MAC is connected to port 3 of E6131 and port 3 acts in reverse-GMII mode to simulate PHY side. ... Reason for output above is that E6131 uses non-standard registers on multiple device addresses and on some of them mii_attach fails, and on another it false detects PHY. ... addresses you can also attach a subset. ... and that is what linux driver probes. ...
    (freebsd-hackers)
  • Re: Snow Leopard and HP 5MP printer?
    ... a fair number of print servers designed to attach to printers via a parallel ... port; you don't have to limit yourself to HP. ... "Windows printing" from the Mac as a means to print. ...
    (comp.sys.mac.system)
  • Re: HEADSUP: uath(4) has been committed.
    ... I should note that this device attaches in OpenBSD 4.x ... I do not know if this will help, but here is output from OpenBSD 4.5 ... port 1 powered ... Atheros Communications Inc, rev 0.01, iSerialNumber 1.0 ...
    (freebsd-current)