Atmel USB Wireless devices

From: Stuart Walsh (stu_at_ipng.org.uk)
Date: 08/28/03

  • Next message: Daan Vreeken [PA4DAN]: "Re: Atmel USB Wireless devices" 
    Date: Thu, 28 Aug 2003 14:26:53 +0100
To: freebsd-hackers@freebsd.org

    Hi,

    Firstly, it would be interesting to know if anyone else is working on
    support for these devices before I get too far into it :)

    I've started working on support for the above devices and have had some
    limited success so far. The device requires two sets of firmware to be
    uploaded for it to work and I have managed to upload the first firmware
    but it doesnt seem to want to boot. Any attempts to read the device
    after uploading firmware result in error code 13(IOERROR). The Linux driver calls
    usb_reset_device() after uploading the firmware but I can't seem to find
    an equivelant in FreeBSD.

    If anyone has any suggestions I'd be greatful :)

    Thanks,

    Stuart
    _______________________________________________
    freebsd-hackers@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
    To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org"

  • Next message: Daan Vreeken [PA4DAN]: "Re: Atmel USB Wireless devices"

    Relevant Pages

    • Re: What next?
      ... Latest firmware flash is 6.3MB in size, I guess the 8MB of flash really is needed. ... Note the support for FAT32/NTFS on one port and FAT32/EXT3 on the other. ... Also, the USB ports should be USB2.0, although the datasheet for the IXP420 mentions 1.1 ... Fix bug that cannot copy large zip file into FAT HDD. ...
      (comp.sys.ibm.ps2.hardware)
    • RE: How to monitor progress of sending a file using HTTP?
      ... transfering states when we perform uploading asynchronously. ... this class seems limited to .net framework standard version ... Microsoft MSDN Online Support Lead ... where an initial response from the community or a Microsoft Support ...
      (microsoft.public.dotnet.distributed_apps)
    • Re: PCI bus numbering and orphaned devices
      ... >> beginning) is to write an OFW PCI bus, analogous to the ACPI one. ... We do not support hotplugging at the moment anyway. ... would implement that in the future without using any firmware support ... > bus drivers in favor of OFW specific ones like ACPI? ...
      (freebsd-current)
    • Re: Atmel USB Wireless devices
      ... The device requires two sets of firmware to be ... The problem is that the device really dies after uploading the internal ... It really needs a reset before it will communicate again. ... The story gets more complex since the descriptors of the device have changed ...
      (freebsd-hackers)
    • Re: dat40
      ... support DAT40 only an A/N-Class? ... worried about the device stressing the SCSI_DAM driver in new ... firmware and hardware package is SCSI-1 ... Later code was added for DLT and finally the changes for Ultrium. ...
      (comp.sys.hp.mpe)