Re: Unprobed PCI bus on VXPro II chipset
From: John Baldwin (jhb_at_FreeBSD.org)
Date: 12/30/03
- Previous message: Evren Yurtesen: "Re: logitech cordless optical mouse problems..."
- In reply to: Sean Welch: "Re: Unprobed PCI bus on VXPro II chipset"
- Next in thread: Sean Welch: "Re: Unprobed PCI bus on VXPro II chipset"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Tue, 30 Dec 2003 14:06:18 -0500 (EST) To: Sean Welch <welchsm@earthlink.net>
On 30-Dec-2003 Sean Welch wrote:
> How 'bout that! I've got USB now!
>
> I went back to the original pcisupport.c as requested but left
> in the extra stuff I had added to pcibus.c (the same stuff that
> was added to pcisupport.c). Now most everything looks to
> be attaching normally. If you want me to take that out as
> well I'll give it a try, but I'm successfully using my usb mouse
> right now and using fxtv to watch broadcast television.
>
> The new output of pciconf -l is:
>
> chip0@pci0:5:0: class=0x060000 card=0x80113388 chip=0x80113388 rev=0x00 hdr=0x00
> isab0@pci0:5:1: class=0x060100 card=0x80123388 chip=0x80123388 rev=0x00 hdr=0x00
> atapci0@pci0:5:2: class=0x010100 card=0x80133388 chip=0x80133388 rev=0x00 hdr=0x00
> bktr0@pci0:8:0: class=0x040000 card=0x13eb0070 chip=0x036e109e rev=0x02 hdr=0x00
> none0@pci0:8:1: class=0x048000 card=0x13eb0070 chip=0x0878109e rev=0x02 hdr=0x00
> uhci0@pci0:9:0: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x04 hdr=0x00
> none1@pci0:10:0: class=0x030000 card=0x89015333 chip=0x89015333 rev=0x16 hdr=0x00
>
> The diff between original and current pcibus.c files is:
It should be ok to drop the patches to pcibus.c as well. I'd really like
to know if just the pci_cfgreg.c change alone is sufficient. Thanks.
> 187a188,227
>> case 0x05851106:
>> s = "VIA 82C585 (Apollo VP1/VPX) system controller";
>> break;
>>
>> case 0x05861106: /* south bridge section -- IDE is covered in ide_pci.c */
>> s = "VIA 82C586 PCI-ISA bridge";
>> break;
>>
>> case 0x05951106:
>> s = "VIA 82C595 (Apollo VP2) system controller";
>> break;
>>
>> case 0x15951106:
>> s = "VIA 82C595 (Apollo VP2) system controller";
>> break;
>>
>> case 0x05971106:
>> s = "VIA 82C597 (Apollow VP3) system controller";
>> break;
>>
>> case 0x30381106:
>> s = "VIA 82C586B USB host controller";
>> break;
>>
>> case 0x30401106:
>> s = "VIA 82C586B ACPI interface";
>> break;
>>
>> case 0x80113388:
>> s = "VXPro II Chipset CPU to PCI Bridge";
>> break;
>>
>> case 0x80123388:
>> s = "VXPro II Chipset PCI to ISA Bridge";
>> break;
>>
>> case 0x80133388:
>> s = "VXPro II Chipset EIDE Controller";
>> break;
>>
>
> The diff between the original and current versions of
> pci_cfgreg.c is:
>
> 583c583
> < outb(CONF1_ADDR_PORT +3, 0);
> ---
>> DELAY(1);
>
> The diff between the GENERIC kernel and my current kernel
> looks like this:
>
> 2c2
> < # GENERIC -- Generic kernel configuration file for FreeBSD/i386
> ---
>> # WARPPHYS -- kernel configuration file for FreeBSD/i386
> 21,22d20
> < cpu I386_CPU
> < cpu I486_CPU
> 24,25c22
> < cpu I686_CPU
> < ident GENERIC
> ---
>> ident WARPPHYS
> 61a59
>> #options PNPBIOS
> 71d68
> < device eisa
> 72a70,80
>> #options PCI_ENABLE_IO_MODES
>> #device puc
>>
>> # bktr brooktree848 I2C hardware interface
>> device bktr
>> device iicbus
>> device iicbb
>> device smbus
>>
>> # Sound
>> device pcm
> 123,137d130
> < # RAID controllers interfaced to the SCSI subsystem
> < device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
> < device dpt # DPT Smartcache - See LINT for options!< device
> iir # Intel Integrated RAID
> < device mly # Mylex AcceleRAID/eXtremeRAID
> < device ciss # Compaq SmartRAID 5* series
> <
> < # RAID controllers
> < device aac # Adaptec FSA RAID, Dell PERC2/PERC3
> < #device aacp # SCSI passthrough for aac (requires CAM)
> < device ida # Compaq Smart RAID
> < device amr # AMI MegaRAID
> < device mlx # Mylex DAC960 family
> < device twe # 3ware Escalade
> <
> 151,159d143
> < # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
> < #device vt0 at isa?
> < #options XSERVER # support for X server on a vt console
> < #options FAT_CURSOR # start with block cursor
> < # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines< #options
> PCVT_SCANSET=2 # IBM keyboards are non-std
> <
> < device agp # support several AGP chipsets
> <
> 166,170d149
> < # PCCARD (PCMCIA) support
> < device card
> < device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
> < device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
> <
> 267,271d245
> <
> < # FireWire support
> < device firewire # FireWire bus code
> < device sbp # SCSI over FireWire (Requires scbus and da)
> < device fwe # Ethernet over FireWire (non-standard!)
>
> Once again, this is 4.9-RELEASE. Let me know what else (if anything)
> you'd like me to try, okay? (That includes trying out 5-CURRENT again.)
> I'll be happy to send a verbose dmesg on request.
>
> Thank you!!
>
>
> Sean
>
> -----Original Message-----
> From: John Baldwin <jhb@FreeBSD.org>
> Sent: Dec 29, 2003 12:33 PM
> To: ticso@cicely.de
> Cc: freebsd-hackers@FreeBSD.org, Sean Welch <Sean_Welch@alum.wofford.org>
> Subject: Re: Unprobed PCI bus on VXPro II chipset
>
>
> On 27-Dec-2003 Bernd Walter wrote:
>> On Fri, Dec 26, 2003 at 10:54:27AM -0800, Sean Welch wrote:
>>> That change seems to have done it!!
>>>
>>> I left in the extra PCI IDs I had added to pcisupport.c
>>> and pci_cfgreg.c -- looks like that helps get things
>>> going. I've got "options PCI_ENABLE_IO_MODES" in
>>> the kernel. I've also got "device puc" due to a suggestion
>>> from fbsd_user on freebsd-questions.
>>>
>>> The USB card doesn't seem to be attaching but I do see
>>> the WinTV card!
>>>
>>> Any other suggestions based on what you see below?
>>
>> Still very strange - you have many shadowed host-pci bridges.
>>
>>> pcib4@pci0:5:0: class=0x060000 card=0x80113388 chip=0x80113388 rev=0x00 hdr=0x00
>>> pcib5@pci0:5:1: class=0x060100 card=0x80123388 chip=0x80123388 rev=0x00 hdr=0x00
>>> pcib6@pci0:5:2: class=0x010100 card=0x80133388 chip=0x80133388 rev=0x00 hdr=0x00
>>> bktr0@pci0:8:0: class=0x040000 card=0x13eb0070 chip=0x036e109e rev=0x02 hdr=0x00
>>> none0@pci0:8:1: class=0x048000 card=0x13eb0070 chip=0x0878109e rev=0x02 hdr=0x00
>>> pcib7@pci0:9:0: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x04 hdr=0x00
>>
>> This one (class=0x0c0300) is your USB (uhci) controller, but it's
>> already bogusly attached to pcib7.
>> Not surprising that uhci(4) didn't take care of it.
>
> The patches to pcisupport.c might be bogus. Sean, can you try
> just the patch to pci_cfgreg.c and no other patches to see how
> it does?
>
> --
>
> John Baldwin <jhb@FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/
> "Power Users Use the Power to Serve!" - http://www.FreeBSD.org/
>
>
>
-- John Baldwin <jhb@FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve!" - http://www.FreeBSD.org/ _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org"
- Previous message: Evren Yurtesen: "Re: logitech cordless optical mouse problems..."
- In reply to: Sean Welch: "Re: Unprobed PCI bus on VXPro II chipset"
- Next in thread: Sean Welch: "Re: Unprobed PCI bus on VXPro II chipset"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
