Re: ssh & select() problem on 5.3

From: Peter Jeremy (PeterJeremy_at_optushome.com.au)
Date: 11/29/04

  • Next message: Alexander Timoshenko: "ntpd question" 
    Date: Tue, 30 Nov 2004 05:51:52 +1100
To: Claudiu Dragalia-Paraipan <dr.clau@gmail.com>

    On Sun, 2004-Nov-28 18:43:47 +0200, Claudiu Dragalia-Paraipan wrote:
    >Since the problem occurs only when I connect to the firewall or to a
    >server behind it, I started to suspect a hardware failure. Could a
    >network card cause such problems ?

    A couple of people have mentioned path-MTU problems. I've also bumped
    into this problem when playing with VLANs where one end of the VLAN
    trunk doesn't support long frames - an oversize packet will get ignored
    by the receiver without any error being returned. 

    -- 
Peter Jeremy
_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org"
  • Next message: Alexander Timoshenko: "ntpd question"

    Relevant Pages

    • Re: ssh & select() problem on 5.3
      ... I started to suspect a hardware failure. ... >network card cause such problems? ... into this problem when playing with VLANs where one end of the VLAN ...
      (freebsd-current)
    • RE: BGE & VLAN stranges
      ... > network card, but when I try to use 802.1Q vlans, I can't ... BGE driver, VLAN driver or my network configuration? ...
      (freebsd-stable)
    • Re: Using multiple VLANs between Aironot 1200 and Linksys SRW2048
      ... Wireless VLANs (VLAN1 w/SSID staff, ... SSID 5/Public only needs Internet Access and I suspect that I'll be ... putting a DHCP server on the VLAN 5 or enabling DHCP on the AP for VLAN ...
      (comp.dcom.sys.cisco)