CPQ DL380 system fan control

From: Aaron Sloan (security_at_adtu.org)
Date: 04/07/05

  • Next message: Robert Watson: "Re: Kernel [memory] tweaking question" 
    Date: Thu, 07 Apr 2005 18:25:30 +0000
To: freebsd-hackers@freebsd.org

    Hello guys and gals,

    Does system fan control on a Compaq DL380 ,first edition, have any support?
    I have looked through the acpi and port recomendations I have come
    across via google
    and I'm not having any luck at all. I believe it is supported in Linux
    but I don't know how.
    I can't say I'm any hardware wizard on this kind of thing.

    %sysctl hw.acpi
    hw.acpi.supported_sleep_state: S4 S5
    hw.acpi.power_button_state: S5
    hw.acpi.sleep_button_state: S4
    hw.acpi.lid_switch_state: NONE
    hw.acpi.standby_state: S1
    hw.acpi.suspend_state: S3
    hw.acpi.sleep_delay: 1
    hw.acpi.s4bios: 0
    hw.acpi.verbose: 0
    hw.acpi.reset_video: 1
    hw.acpi.cpu.cx_supported: C1/0
    hw.acpi.cpu.cx_lowest: C1
    hw.acpi.cpu.cx_usage: 100.00%
    hw.acpi.thermal.min_runtime: 0
    hw.acpi.thermal.polling_rate: 10
    hw.acpi.thermal.tz0.temperature: 8.3C
    hw.acpi.thermal.tz0.active: -1
    hw.acpi.thermal.tz0.thermal_flags: 0
    hw.acpi.thermal.tz0._PSV: 9.8C
    hw.acpi.thermal.tz0._HOT: -1
    hw.acpi.thermal.tz0._CRT: 31.3C
    hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1

    GENERIC kernel
    Is acpi0 <compaq racebait> what I should be looking for or
    is there another system controlling the system/case fan?

    CPU: Intel Pentium III (996.85-MHz 686-class CPU)
      Origin = "GenuineIntel" Id = 0x686 Stepping = 6
      
    Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
    real memory = 536854528 (511 MB)
    avail memory = 515682304 (491 MB)
    ACPI APIC Table: <COMPAQ 00000083>
    ioapic0: Changing APIC ID to 8
    MADT: Forcing active-low polarity and level trigger for SCI
    ioapic0 <Version 1.1> irqs 0-34 on motherboard
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    acpi0: <COMPAQ RACEBAIT> on motherboard
    acpi0: Power Button (fixed)
    Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
    cpu0: <ACPI CPU> on acpi0
    pcib0: <ACPI Host-PCI bridge> on acpi0
    pci0: <ACPI PCI bus> on pcib0
    ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem
    0xc5000000-0xc5ffffff,0xc6000000-0xc6ffffff irq 19 at device 1.0 on pci0
    ida0: drives=1 firm_rev=1.50
    idad0: <Compaq Logical Drive> on ida0
    idad0: 26017MB (53284800 sectors), blocksize=512
    fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2400-0x243f mem
    0xc4e00000-0xc4efffff,0xc4fff000-0xc4ffffff irq 17 at device 2.0 on pci0
    miibus0: <MII bus> on fxp0
    inphy0: <i82555 10/100 media interface> on miibus0
    inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    fxp0: Ethernet address: 00:02:a5:64:e6:95
    pci0: <display, VGA> at device 3.0 (no driver attached)
    pci0: <base peripheral> at device 4.0 (no driver attached)
    isab0: <PCI-ISA bridge> at device 15.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <ServerWorks ROSB4 UDMA33 controller> port
    0x2c00-0x2c0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
    ata0: channel #0 on atapci0
    ata1: channel #1 on atapci0
    pcib1: <ACPI Host-PCI bridge> on acpi0
    pci3: <ACPI PCI bus> on pcib1
    acpi_tz0: <Thermal Zone> on acpi0
    atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: model MouseMan+, device ID 0
    ppc0: <Standard parallel printer port> port 0x778-0x77d,0x378-0x37f irq
    7 drq 0 on acpi0
    ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
    ppbus0: <Parallel port bus> on ppc0
    plip0: <PLIP network interface> on ppbus0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
    sio0: type 16550A
    sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on acpi0
    sio1: type 16550A
    orm0: <ISA Option ROMs> at iomem
    0xee000-0xeffff,0xe8000-0xedfff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
    pmtimer0 on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    Timecounter "TSC" frequency 996849075 Hz quality 800
    Timecounters tick every 10.000 msec
    acd0: CDROM <COMPAQ CD-ROM SN-124Q/QA17> at ata0-master PIO4
    Mounting root from ufs:/dev/idad0s2a

    Thanks,
    Aaron
    _______________________________________________
    freebsd-hackers@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
    To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org"

  • Next message: Robert Watson: "Re: Kernel [memory] tweaking question"