NVIDIA FreeBSD kernel feature requests


Hello,

Do you plan for a driver for nForce 590sli RAID controller on FreeBSD ? The disks are recognized but not the RAID arrays.
On Motherboard ECS KN3-SLI2, JMicron JMB363 driver is already included in FreeBSD 6.2 (ar0) but in kernel, it goes up to nForce 4.
Perhaps have you got later information ?


Jean-Pierre Mouillé
ORANGE-FRANCE/DT/DPP/SC
01.55.22.27.57
jmouille.ext@xxxxxxxxxxxxxxxxxx
P please consider the environment - do you really need to print this email?



*********************************
This message and any attachments (the "message") are confidential and intended solely for the addressees. Any unauthorised
use or dissemination is prohibited.
Messages are susceptible to alteration. France Telecom Group shall not be liable for the message if altered, changed or
falsified.
If you are not the intended addressee of this message, please cancel it immediately and inform the sender.
********************************
_______________________________________________
freebsd-hackers@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: 3310 RAID1 (mirror) Question
    ... far as configuration goes I haven't noticed any differences. ... to go with the RAID controller, ... the 3310's disks via raw access for a Sybase database. ... The 3310 will only give you a single host connection. ...
    (comp.unix.solaris)
  • Re: Flashing lights on my disk drives on an Alphaserver ES40
    ... When you have internal disks a junk card is installed in the ES40 - assuming ... > or whatever the controller is - even if it is not a RAID controller it> should be listed in SRM e.g. a PKxn device. ... > If the RAID controller is seen by SRM, go into the RAID config utility> and check that your physical drives are seen and your> logical drives are still defined ... > AND a RAID card, it might be normal to have no devices showing on the> internal SCSI bus, so if the RAID card disappears then there would> be 'unused' controllers - make sure you follow the disk cables back! ...
    (comp.os.vms)
  • Re: Flashing lights on my disk drives on an Alphaserver ES40
    ... When you have internal disks a junk card is installed in the ES40 - assuming ... > or whatever the controller is - even if it is not a RAID controller it> should be listed in SRM e.g. a PKxn device. ... > If the RAID controller is seen by SRM, go into the RAID config utility> and check that your physical drives are seen and your> logical drives are still defined ... > AND a RAID card, it might be normal to have no devices showing on the> internal SCSI bus, so if the RAID card disappears then there would> be 'unused' controllers - make sure you follow the disk cables back! ...
    (comp.sys.dec)
  • Re: ext3 filesystem not working with raid5
    ... and the array might already have reconstructed with bad data due ... consider *maxtor*250GIG IDE disks to be nice for single-user ... -rf' or a rooted system or a RAID controller running amuck at startup. ... > exactly what the problem is with the ext3 filesystem and how to go ...
    (alt.linux)
  • Re: System serivce to get the Host Bus Target Lun combination???
    ... > The HBA is more or less invisible. ... Normal or real disks will always appear as for instance DKB600, ... no LUN, just a SCSI ID. ... that is disks that are configured on a raid controller that is ...
    (comp.os.vms)