Re: i386/127710: My driver PCI probe is not called for mycorrespondingdevice ID and Vendor ID

Thanks for your support. my probe is getting called for all
the bridges not for my pci device. so please provide the fix .

OR
Is any other way available for making my driver to override the probe of
cbb driver for my corresponding device (With out changing cbb driver).

If your probe returns a higher number that's negative, it will.
Unless cbb is returning 0, your probe routine will get called. Make
sure it isn't. Code inspection suggests that it isn't.

Warner



With regards,
Bagavathy kumar .M

-----Original Message-----
From: M. Warner Losh [mailto:imp@xxxxxxxxxx]
Sent: Friday, October 03, 2008 11:03 AM
To: Bagavathy Kumar Mahendran
Cc: jhb@xxxxxxxxxxx; freebsd-hackers@xxxxxxxxxxx
Subject: Re: i386/127710: My driver PCI probe is not called for
mycorrespondingdevice ID and Vendor ID

In message:
<68C9F31EF19DB6448F515EF294028FDEE99BCE@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
"Bagavathy Kumar Mahendran " <bagavathykumar.m@xxxxxx>
writes:
:
: Dear Baldwin,
: Thanks for your support .but my pci probe function is
not
: getting called for my device id and vendor id. Because pccbb driver
: already sets the device_set_desc as PCI-CardBus Bridge. So is there
any
: other option for me to make my_pciprobe function to be called for my
: corresponding device id and vendor id.

That's not why your probe isn't called. Setting a description is
standard behavior for the probe routine. Are you sure that the device
probe routine is getting called at all for any device? Have you tried
just leaving cbb out of the kernel? I recently fixed the original
problem in cbb (the fact it doesn't check the bridge type too), maybe
you could try to pick up that fix as well?

Warner


: Thanks,
:
: Regards,
: Bagavathy kumar .M
:
:
:
: -----Original Message-----
: From: John Baldwin [mailto:jhb@xxxxxxxxxxx]
: Sent: Wednesday, October 01, 2008 8:57 PM
: To: freebsd-hackers@xxxxxxxxxxx
: Cc: Bagavathy Kumar Mahendran ; Warner Losh
: Subject: Re: FW: i386/127710: My driver PCI probe is not called for my
: correspondingdevice ID and Vendor ID
:
: On Wednesday 01 October 2008 08:50:15 am Bagavathy Kumar Mahendran
: wrote:
: >
: > Dear All,
: > Iam writing a new driver for a SAS/SATA Controller
having
: a
: > Class ID -0x01
: > Sub Class - 0x07
: > Programming Interface - 0x00
: >
: > Hence instead of my probe function the Static build Card Bus Driver
: cbb
: > is attaching just by simply checking sub class 0x07 and programming
: > interface 0x00.hence my probe gets failed. Kindly help me in
resolving
: > this .what I thought is to add the card bus driver a checking of
CLASS
: > ID in its pci probe function.
:
: The pccbb driver returns BUS_PROBE_DEFAULT (it should probably return
: GENERIC
: in the case where it matches only on class codes). Your driver just
: needs to
: return a numerically higher value (but still < 0) to claim the device.
: You
: can probably use BUS_PROBE_VENDOR or BUS_PROBE_DEFAULT + 1.
:
: --
: John Baldwin
:
: DISCLAIMER:
:
------------------------------------------------------------------------
-----------------------------------------------
:
: The contents of this e-mail and any attachment(s) are confidential and
intended for the named recipient(s) only.
: It shall not attach any liability on the originator or HCL or its
affiliates. Any views or opinions presented in
: this email are solely those of the author and may not necessarily
reflect the opinions of HCL or its affiliates.
: Any form of reproduction, dissemination, copying, disclosure,
modification, distribution and / or publication of
: this message without the prior written consent of the author of this
e-mail is strictly prohibited. If you have
: received this email in error please delete it and notify the sender
immediately. Before opening any mail and
: attachments please check them for viruses and defect.
:
:
------------------------------------------------------------------------
-----------------------------------------------
:
:


_______________________________________________
freebsd-hackers@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@xxxxxxxxxxx"

Relevant Pages