RE: Multiple Quad Ethernet Cards in one PC?

From: Andy Farkas (andyf_at_speednet.com.au)
Date: 07/24/03

  • Next message: marlon corleone: "hi" 
    Date: Thu, 24 Jul 2003 11:38:57 +1000 (EST)
To: Emre Bastuz <info@emre.de>

    On Wed, 23 Jul 2003, Emre Bastuz wrote:

    > chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00
    > pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
    > isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
    > atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
    > none0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
    > chip1@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
    > pcib2@pci0:12:0: class=0x060400 card=0x000000dc chip=0xb1528086 rev=0x00 hdr=0x01
    > pcib3@pci0:14:0: class=0x060400 card=0x000000dc chip=0xb1528086 rev=0x00 hdr=0x01
    > pcib4@pci0:16:0: class=0x060400 card=0x000000dc chip=0xb1528086 rev=0x00 hdr=0x01
    > none1@pci1:0:0: class=0x030000 card=0xff03102b chip=0x0521102b rev=0x03 hdr=0x00
    > ste0@pci2:4:0: class=0x020000 card=0x10121186 chip=0x10021186 rev=0x14 hdr=0x00
    > ste1@pci2:5:0: class=0x020000 card=0x10121186 chip=0x10021186 rev=0x14 hdr=0x00
    > ste2@pci2:6:0: class=0x020000 card=0x10121186 chip=0x10021186 rev=0x14 hdr=0x00
    > ste3@pci2:7:0: class=0x020000 card=0x10121186 chip=0x10021186 rev=0x14 hdr=0x00
    > none2@pci3:4:0: class=0x020000 card=0x00000000 chip=0x10021186 rev=0x14 hdr=0x00
    > none3@pci3:5:0: class=0x020000 card=0x00000000 chip=0x10021186 rev=0x14 hdr=0x00
    > none4@pci3:6:0: class=0x020000 card=0x00000000 chip=0x10021186 rev=0x14 hdr=0x00
    > none5@pci3:7:0: class=0x020000 card=0xffff5366 chip=0x020113f0 rev=0x14 hdr=0x00
    > ste4@pci4:4:0: class=0x020000 card=0x10121186 chip=0x10021186 rev=0x14 hdr=0x00
    > ste5@pci4:5:0: class=0x020000 card=0x10121186 chip=0x10021186 rev=0x14 hdr=0x00
    > ste6@pci4:6:0: class=0x020000 card=0x10121186 chip=0x10021186 rev=0x14 hdr=0x00
    > ste7@pci4:7:0: class=0x020000 card=0x10121186 chip=0x10021186 rev=0x14 hdr=0x00
    >
    > I always managed to get around IRQ problems so far by changing settings in the
    > Bios, deactivating not needed components of the PC, etc. but this one really
    > confuses me.
    >
    > My guess is that the entries none2 through none5 are the ports that I am looking
    > for - I just have no clue on how to activate them.

    You also have none0 and none1.

    My guess is a hardware resource conflict. Show us what dmesg.boot says. We
    need to see the irq assignments.

    Does it work with only 1 card in? 2 cards? 

    --
 :{ andyf@speednet.com.au
        Andy Farkas
    System Administrator
   Speednet Communications
 http://www.speednet.com.au/
_______________________________________________
freebsd-isp@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-isp
To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org"
  • Next message: marlon corleone: "hi"