IDE Raid Controllers

From: John Brooks (john_at_day-light.com)
Date: 07/29/03

  • Next message: Dave [Hawk-Systems]: "using SSH to execute commands on remote servers as different user"
    To: <freebsd-isp@freebsd.org>
    Date: Tue, 29 Jul 2003 10:58:29 -0500
    
    

    I need to set up Raid1 on a FreeBSD4.8 box under light load.
    Which would be a better choice for a controller, 3Ware Escalade
    or Promise? Has anyone had problems with either?

    --
    John Brooks
    john@stlbsd.org 
    _______________________________________________
    freebsd-isp@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-isp
    To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org"
    

  • Next message: Dave [Hawk-Systems]: "using SSH to execute commands on remote servers as different user"

    Relevant Pages

    • Re: Motherboard for Dual Core E6850
      ... it's a necessary precaution to have RAID1. ... Gradual lurking failures, there is every chance your controller will copy the bad version over the top of the good one, rather than the other way round. ... PC-home-user grade RAID like the plague - a PITA to set up, ... With RAID1 you may survive. ...
      (uk.comp.homebuilt)
    • pata_it821x in 2.6.27 - works but no LBA48 and "hdparm -t" is slower
      ... and my RAID1 on IT8212 controller now works without any patching. ... signifies the current active mode ...
      (Linux-Kernel)
    • Re: [opensuse] wait times excessive high {Suse 10.3 & 11}
      ... A cheap sata raid5 on a 3ware controller is already ... on my system (RAID1 on 2 SATA drives). ... The operator bus, the memory bus and the peripheral ditto are also way ...
      (SuSE)
    • Re: Poor raid 1 performance?
      ... sophisticated RAID1 controllers. ... what is relative performance of RAID-1 versus non-RAID for sequential ... are long as seen by the app are seen by the RAID controller and by the HDs: ...
      (comp.sys.ibm.pc.hardware.storage)
    • Re: Temporarily going from RAID1 to single drive...
      ... my backup PC doesn't have RAID1 ... The HDDs are SATA drives. ... > It's more important to know the RAID controller and look it up in the ...
      (comp.sys.ibm.pc.hardware.storage)