Re: How to reset admin's password on 3com superstack ?

From: Harti Brandt (harti_at_freebsd.org)
Date: 05/24/04

  • Next message: Michael Vince: "Re: raid backup" 
    Date: Mon, 24 May 2004 13:07:30 +0200 (MET DST)
To: Supote Leelasupphakorn <pjn0211@yahoo.com>

    On Mon, 24 May 2004, [iso-8859-1] Supote Leelasupphakorn wrote:

    SL>Hi...lists
    SL>
    SL> As the subject said, I have forgot admin's password
    SL>of my 3com switching it's model is "3300 SuperStack"
    SL>I'd like to know is there any way to reset admin's password ?
    SL>
    SL>CC to my email address is appreciated.

    If you google around on the net you'll find two possible ways:

    1. You're lucky and your software version has one of the backdoors
    that you find on the net.

    2. You connect your switch to another via those special connectors on
    the back.

    For me neither of those worked, but fortunately SNMP was enabled on the
    switch and the write community was something like 'private' (don't
    remember exactly). The passwords are in the MIB and I could write them via
    snmpset.

    If neither of those work, you'll better get a new one, because 3com
    appears to charge real money for help in those cases.

    harti
    _______________________________________________
    freebsd-isp@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-isp
    To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org"

  • Next message: Michael Vince: "Re: raid backup"

    Relevant Pages

    • Re: How to reset admins password on 3com superstack ?
      ... On Mon, 24 May 2004, Supote Leelasupphakorn wrote: ... You connect your switch to another via those special connectors on ... For me neither of those worked, but fortunately SNMP was enabled on the ... switch and the write community was something like 'private' (don't ...
      (freebsd-net)
    • Re: How do I get the port on a switch that a PC is connected to.
      ... With SNMP there are two distinct concepts. ... "the command tcpConnLocalPort" - you ... If the switch maintains this information, you are in luck and you can ... The advantage of this method is you can directly get the port of the ...
      (comp.protocols.snmp)
    • Re: How do I get the port on a switch that a PC is connected to.
      ... With SNMP there are two distinct concepts. ... If the switch maintains this information, you are in luck and you can ... the exact OID) or the GETNEXT command (does not require the exact ... The steps to get started with a MIB Walker are: ...
      (comp.protocols.snmp)
    • Re: Measure amount of network usage
      ... netflow is adequate to this task. ... cheap, but should be other free options out there), it will use SNMP ... you to graph each switchport on the switch (you would need to resolve ... connected to - as i use (up to 200 ports per switch). ...
      (comp.dcom.sys.cisco)
    • Re: Measure amount of network usage
      ... netflow is adequate to this task. ... cheap, but should be other free options out there), it will use SNMP ... you to graph each switchport on the switch (you would need to resolve ... connected to - as i use (up to 200 ports per switch). ...
      (comp.dcom.sys.cisco)