Re[2]: raid backup

From: Maksymilian Wrzesinski (mcson_at_obta.uw.edu.pl)
Date: 05/28/04

  • Next message: Michael Vince: "Re: raid backup" 
    Date: Fri, 28 May 2004 01:51:43 +0200
To: Michael Vince <michael@roq.com>

    Witaj Michael,

    W Twoim liście datowanym 25 maja 2004 (03:49:14) można przeczytać:

    MV> It seems that the the Nforce3 250gb from Nvidia has hardware based raid
    MV> built into their chipset for motherboards with a lot of top shelf

    i have checked some nforce2 ultra400 boards available at shops
    arround. it appears that those boards, like msi k7n2 Delta-ILSR,
    are only capable of having raid on SATA interface, because of
    only one IDE connector and two SATA's. will it support RAID based on
    one IDE and one SATA drive? 

    -- 
Pozdrowienia,
 Maksymilian                            mailto:mcson@obta.uw.edu.pl
_______________________________________________
freebsd-isp@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-isp
To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org"
  • Next message: Michael Vince: "Re: raid backup"

    Relevant Pages

    • Re[2]: raid backup
      ... MV> It seems that the the Nforce3 250gb from Nvidia has hardware based raid ... are only capable of having raid on SATA interface, ... only one IDE connector and two SATA's. ...
      (freebsd-performance)
    • Re: nvRAID kein hardware RAID?
      ... Ich habe zwar keinen nForce3, ... dass das ein hardware RAID controller ist. ... Prev by Date: ...
      (de.comp.hardware.laufwerke.festplatten)
    • Re: Why doesnt VIA RAid Tool recognize my RAID drive?
      ... A pair of them is set up as a raid 0. ... The VIA RAID Tool v4.04 shows the following: Controller 0, ... The two drives that form the RAID array run off the motherboard. ... Notice there is an IDE connector at the top of the ...
      (microsoft.public.windowsxp.general)