AW: AW: AW: HP DL140 with SATA

• Previous message: Fretz Marco: "AW: HP DL140 with SATA"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Date: Wed, 21 Sep 2005 17:06:47 +0200
To: "Rasmus Fauske" <rasmus@postboks.org>, <freebsd-isp@freebsd.org>

Hello

news: no chance to get the SATA ICH5 run on 6.0 or 5.4. i got only ATA_IDENTIFY time outs

I tried freebsd 4.11 > no problem

Why this? Anyone any idea?

thanks

-----Ursprüngliche Nachricht-----
Von: Rasmus Fauske [mailto:rasmus@postboks.org]
Gesendet: Mittwoch, 21. September 2005 13:24
An: Fretz Marco
Betreff: Re: AW: AW: HP DL140 with SATA

It was working when I tried it, but I only used it fo some minutes.

Fretz Marco wrote:

>Hi
>
>Thanks. Ok but 6.0 isnt stable yet. So i need to run 5.4. you'r sure, you have a DL140 G2 and SATA controller was working with free 5.4?
>
>-----Ursprüngliche Nachricht-----
>Von: Rasmus Fauske [mailto:rasmus@postboks.org]
>Gesendet: Mittwoch, 21. September 2005 13:12
>An: Fretz Marco
>Betreff: Re: AW: HP DL140 with SATA
>Wichtigkeit: Hoch
>
>
>
>>Hello
>>
>>Thanks for your help. I had a dl140 g2 here some days ago. I booted from a
>>5.4-release cd and got no support for this controller. May you send me
>>some kernel output? Dmesg?
>>
>>
>
>This is the output for 6.0, I don't have for 5.4 any more as this box is
>in production now
>
>Copyright (c) 1992-2005 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD 6.0-BETA5 #3: Sun Sep 18 08:22:37 CEST 2005
> admin@web.dialecta.no:/usr/obj/usr/src/sys/WEB
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.11-MHz K8-class CPU)
> Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
> AMD Features=0x20100800<SYSCALL,NX,LM>
> Hyperthreading: 2 logical CPUs
>real memory = 1073152000 (1023 MB)
>avail memory = 1027723264 (980 MB)
>ACPI APIC Table: <PTLTD APIC >
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>ioapic1 <Version 2.0> irqs 24-47 on motherboard
>ioapic2 <Version 2.0> irqs 48-71 on motherboard
>acpi0: <PTLTD RSDT> on motherboard
>acpi0: Power Button (fixed)
>pci_link0: <ACPI PCI Link LNKA> irq 5 on acpi0
>pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
>pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
>pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0
>pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
>pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
>pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
>pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
>cpu0: <ACPI CPU> on acpi0
>acpi_throttle0: <ACPI CPU Throttling> on cpu0
>cpu1: <ACPI CPU> on acpi0
>acpi_throttle1: <ACPI CPU Throttling> on cpu1
>acpi_throttle1: failed to attach P_CNT
>device_attach: acpi_throttle1 attach returned 6
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: <unknown> at device 0.1 (no driver attached)
>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem
>0xdd100000-0xdd10ffff irq 16 at device 0.0 on pci2
>miibus0: <MII bus> on bge0
>brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
>brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
>1000baseTX-FDX, auto
>bge0: Ethernet address: 00:14:38:a7:12:96
>pcib3: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>bge1: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem
>0xdd200000-0xdd20ffff irq 16 at device 0.0 on pci3
>miibus1: <MII bus> on bge1
>brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1
>brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
>1000baseTX-FDX, auto
>bge1: Ethernet address: 00:14:38:a7:12:97
>pcib4: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
>pci4: <ACPI PCI bus> on pcib4
>pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4
>pci5: <ACPI PCI bus> on pcib5
>pci4: <base peripheral, interrupt controller> at device 0.1 (no driver
>attached)
>pcib6: <ACPI PCI-PCI bridge> at device 0.2 on pci4
>pci6: <ACPI PCI bus> on pcib6
>pci4: <base peripheral, interrupt controller> at device 0.3 (no driver
>attached)
>pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci7: <ACPI PCI bus> on pcib7
>pci7: <display, VGA> at device 1.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH5 SATA150 controller> port
>0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1430-0x143f at device 31.2 on pci0
>atapci0: failed to enable memory mapping!
>ata0: <ATA channel 0> on atapci0
>ata1: <ATA channel 1> on atapci0
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>acpi_button0: <Power Button> on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xdc000-0xdffff on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounters tick every 1.000 msec
>acd0: CDROM <CD-224E/9.9A> at ata0-master PIO4
>ad2: 76319MB <Maxtor 6Y080M0 YAR511W0> at ata1-master SATA150
>GEOM_MIRROR: Device gm0 created (id=2900722631).
>GEOM_MIRROR: Device gm0: provider ad2 detected.
>ad3: 76319MB <Maxtor 6Y080M0 YAR511W0> at ata1-slave SATA150
>GEOM_MIRROR: Device gm0: provider ad3 detected.
>GEOM_MIRROR: Device gm0: provider ad3 activated.
>GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
>GEOM_MIRROR: Device gm0: rebuilding provider ad2.
>SMP: AP CPU #1 Launched!
>Trying to mount root from ufs:/dev/mirror/gm0s1a
>
>
>
>>Thanks
>>
>>Kind regards
>>marco
>>
>>-----Ursprüngliche Nachricht-----
>>Von: owner-freebsd-isp@freebsd.org [mailto:owner-freebsd-isp@freebsd.org]
>>Im Auftrag von Rasmus Fauske
>>Gesendet: Donnerstag, 15. September 2005 14:14
>>An: freebsd-isp@freebsd.org
>>Betreff: Re: HP DL140 with SATA
>>
>>Fretz Marco wrote:
>>
>>
>>
>>>Hi there
>>>
>>>We are an ips and looking for some pizza box server from HP. Do you got
>>>any experiences with the HP DL140 with SATA Raid? Is this Controller
>>>supported in Free 5.4?
>>>
>>>
>>>
>>>
>>It is a normal SATA non-raid kontroller, I am running a dl140 g2 with a
>>genom mirror. working great with 5.4 and 6.0 and 6.0/amd64
>>
>>--
>>Rasmus Fauske
>>_______________________________________________
>>freebsd-isp@freebsd.org mailing list
>>http://lists.freebsd.org/mailman/listinfo/freebsd-isp
>>To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org"
>>
>>
>>
>
>
>
>
_______________________________________________
freebsd-isp@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-isp
To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org"

• Previous message: Fretz Marco: "AW: HP DL140 with SATA"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]