Cisco 2511 Access Server + FreeBSD 5.4-STABLE

From: James Ryan (james_at_jpri.com)
Date: 10/28/05

  • Next message: Hugh Blandford: "Re: Cisco 2511 Access Server + FreeBSD 5.4-STABLE" 
    Date: Thu, 27 Oct 2005 20:58:33 -0500
To: freebsd-isp@freebsd.org

    Hello all,

    I apologize if this is trivial, but I am having some issues getting a
    Cisco 2511 Access Server to talk to a FreeBSD 5.4-STABLE machine
    connected from com1 to the async line #1 on the Cisco box via RJ-45 to
    DB9 serial adapter.

    I have enabled getty on ttyd0; here is the line from ttys:
    % cat /etc/ttys | grep ttyd0
    ttyd0 "/usr/libexec/getty std.9600" vt100 on secure

    I also know that getty is listening on ttyd0:
    % ps -ax | grep ttyd0
    30951 d0 Is+ 0:00.00 /usr/libexec/getty std.9600 ttyd0

    When I telnet to the IP address of the Ethernet interface on the Cisco
    box, it simply hangs upon connect. I am guessing this means there is no
    communication between the 2511 and my FreeBSD machine. This happens
    when I telnet from both the Cisco machine and any other box on the network.

    % telnet 192.168.2.10 2001
    Trying 192.168.2.10...
    Connected to 192.168.2.10.
    Escape character is '^]'.

    Here is a copy of my cisco config:

    sterm1#show running-config
    Building configuration...

    Current configuration : 734 bytes
    !
    version 12.1
    service timestamps debug uptime
    service timestamps log uptime
    no service password-encryption
    !
    hostname sterm1
    !
    enable secret 5 $1$aDXI$a60Yn9vChs6U10vGhQn0Q/
    enable password xxxx
    !
    !
    !
    !
    !
    ip subnet-zero
    no ip finger
    ip host port1 2001 192.168.2.10
    !
    !
    !
    !
    interface Ethernet0
      ip address 192.168.2.10 255.255.255.0
    !
    interface Serial0
      no ip address
      shutdown
    !
    interface Serial1
      no ip address
      shutdown
    !
    router igrp 1
      redistribute connected
      network 192.168.2.0
    !
    ip classless
    ip http server
    !
    dialer-list 1 protocol ip permit
    dialer-list 1 protocol ipx permit
    !
    line con 0
      transport input none
    line 1 16
      no exec
      transport input telnet
      stopbits 1
    line aux 0
    line vty 0 4
      password xxxx
      login
    !
    end

    I know this is a mess of information, but any advice anyone has with
    this would be GREATLY appreciated; I am about to pull my hair out.

    Cheers,

    James
    _______________________________________________
    freebsd-isp@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-isp
    To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org"

  • Next message: Hugh Blandford: "Re: Cisco 2511 Access Server + FreeBSD 5.4-STABLE"

    Relevant Pages