Re: Cisco 2511 Access Server + FreeBSD 5.4-STABLE

From: Hugh Blandford (hugh_at_island.net.au)
Date: 10/28/05

  • Next message: James Ryan: "Re: Cisco 2511 Access Server + FreeBSD 5.4-STABLE" 
    Date: Fri, 28 Oct 2005 12:06:19 +1000
To: James Ryan <james@jpri.com>

    Hi James,

    have you tried using

    ttyd0 "/usr/libexec/getty 3wire.115200" dialup on secure

    on the cisco we have

    line 1 4
     transport input telnet
     speed 115200
     flowcontrol hardware

    Regards,

    Hugh

    James Ryan wrote:

    > Hello all,
    >
    > I apologize if this is trivial, but I am having some issues getting a
    > Cisco 2511 Access Server to talk to a FreeBSD 5.4-STABLE machine
    > connected from com1 to the async line #1 on the Cisco box via RJ-45 to
    > DB9 serial adapter.
    >
    > I have enabled getty on ttyd0; here is the line from ttys:
    > % cat /etc/ttys | grep ttyd0
    > ttyd0 "/usr/libexec/getty std.9600" vt100 on secure
    >
    >
    > I also know that getty is listening on ttyd0:
    > % ps -ax | grep ttyd0
    > 30951 d0 Is+ 0:00.00 /usr/libexec/getty std.9600 ttyd0
    >
    >
    > When I telnet to the IP address of the Ethernet interface on the Cisco
    > box, it simply hangs upon connect. I am guessing this means there is
    > no communication between the 2511 and my FreeBSD machine. This
    > happens when I telnet from both the Cisco machine and any other box on
    > the network.
    >
    > % telnet 192.168.2.10 2001
    > Trying 192.168.2.10...
    > Connected to 192.168.2.10.
    > Escape character is '^]'.
    >
    >
    > Here is a copy of my cisco config:
    >
    > sterm1#show running-config
    > Building configuration...
    >
    > Current configuration : 734 bytes
    > !
    > version 12.1
    > service timestamps debug uptime
    > service timestamps log uptime
    > no service password-encryption
    > !
    > hostname sterm1
    > !
    > enable secret 5 $1$aDXI$a60Yn9vChs6U10vGhQn0Q/
    > enable password xxxx
    > !
    > !
    > !
    > !
    > !
    > ip subnet-zero
    > no ip finger
    > ip host port1 2001 192.168.2.10
    > !
    > !
    > !
    > !
    > interface Ethernet0
    > ip address 192.168.2.10 255.255.255.0
    > !
    > interface Serial0
    > no ip address
    > shutdown
    > !
    > interface Serial1
    > no ip address
    > shutdown
    > !
    > router igrp 1
    > redistribute connected
    > network 192.168.2.0
    > !
    > ip classless
    > ip http server
    > !
    > dialer-list 1 protocol ip permit
    > dialer-list 1 protocol ipx permit
    > !
    > line con 0
    > transport input none
    > line 1 16
    > no exec
    > transport input telnet
    > stopbits 1
    > line aux 0
    > line vty 0 4
    > password xxxx
    > login
    > !
    > end
    >
    >
    > I know this is a mess of information, but any advice anyone has with
    > this would be GREATLY appreciated; I am about to pull my hair out.
    >
    > Cheers,
    >
    > James
    > _______________________________________________
    > freebsd-isp@freebsd.org mailing list
    > http://lists.freebsd.org/mailman/listinfo/freebsd-isp
    > To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org" 

    -- 
Hugh Blandford
Island Internet
ph 1300 130 428
mb 0412 016 875
_______________________________________________
freebsd-isp@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-isp
To unsubscribe, send any mail to "freebsd-isp-unsubscribe@freebsd.org"
  • Next message: James Ryan: "Re: Cisco 2511 Access Server + FreeBSD 5.4-STABLE"

    Relevant Pages