Re: bandwidth monitoring

Ntop is a good tool, we use it, but my experience is that it's buggy at
best and downright unusable at times. Also, it's data isn't very
portable. I'd recommend using SNMP data from a managed switch. If that's
not an option the you might consider using SNMP data from your router or
worst case directly from each individual server. In terms of software
this generally means net-snmp connected to rrdtool or mrtg. I googled
real quick and
http://www.openxtra.co.uk/resource-center/open_source_network_monitoring.php
seems to provide a quick front en to these tools.

Thank You,

Cody Baker
cody@xxxxxxxxxxxxx


Steve Ames wrote:
ntop would work if its actually a hub. ntop would work with a switch
also but you'd have to tell the switch to make sure that your BSD
box gets a copy of all traffic.

On Fri, May 26, 2006 at 08:55:59AM -0700, Jim Pazarena wrote:

Is there the ability to have a server which is in the common hub
monitor bandwidth usage of clients going out the gateway?

My telco will shortly be changing billing practices and bandwidth
usage per client will be extremely important per customer.

Is there a FreeBSD port available to do this, or must I have an appliance
in-line that all traffic passes thru?

Thanks!
Jim
_______________________________________________
freebsd-isp@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-isp
To unsubscribe, send any mail to "freebsd-isp-unsubscribe@xxxxxxxxxxx"

_______________________________________________
freebsd-isp@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-isp
To unsubscribe, send any mail to "freebsd-isp-unsubscribe@xxxxxxxxxxx"


_______________________________________________
freebsd-isp@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-isp
To unsubscribe, send any mail to "freebsd-isp-unsubscribe@xxxxxxxxxxx"