Re: megaraid controller

On Wed, Jun 21, 2006 at 09:20:18PM -0400, mike@xxxxxxxxxxx wrote:

Anyone know how to tell if a hardware raid controller is in degrated mode
through camcontrol or any other command line util?

Doesn't atacontrol work like this?

# atacontrol status ar0
ar0: ATA RAID1 subdisks: ad4 ad8 status: READY

From dmesg:

ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
=================================================
format nVidia MediaShield
type RAID1
flags 0x01 1<READY>
magic_0 0x557a925c3cb22c4d
magic_1 0x61b30330621f01db
generation 0
total_sectors 488395008
offset_sectors 0
heads 255
sectors 63
cylinders 30401
width 1
interleave 128
total_disks 2
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4: sectors 488395008
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad8: sectors 488395008
=================================================
ar0: 238474MB <nVidia MediaShield RAID1> status: READY
ar0: 488395008 sectors [30401C/255H/63S] <>
subdisks defined as:
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad8 at ata4-master



I know on boot it'll show up in the dmesg, but I want to do it without
that if possible.

thanks.
-mike


_______________________________________________
freebsd-isp@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-isp
To unsubscribe, send any mail to "freebsd-isp-unsubscribe@xxxxxxxxxxx"

--
Brian Reichert <reichert@xxxxxxxxxxx>
55 Crystal Ave. #286 Daytime number: (603) 434-6842
Derry NH 03038-1725 USA BSD admin/developer at large
_______________________________________________
freebsd-isp@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-isp
To unsubscribe, send any mail to "freebsd-isp-unsubscribe@xxxxxxxxxxx"