[freebsd-net] pb with nat....

zel_at_free.fr
Date: 06/20/03

  • Next message: Anton Blad: "Point-to-point over ethernet" 
    To: freebsd-net@FreeBSD.ORG
Date: Fri, 20 Jun 2003 16:20:19 +0200 (CEST)

    I had a pb with my config and now with your help... it is resolved by, now I am

    in front of a new problem:

    The situation is described below:

    <aDSL ethernet> - 10.0.0.0/24 - <FREEBSD Firewall> - 192.168.1.0/24
    - <clients>
                                  ed1/tun0 ep0

    So...

    All outcoming packets are 'nated' by the firewall, which is a very small
    computer (a P100 with only 24 Mo RAM and a little hard drive..). So this
    computer must not do an other thing than firewalling, routing or nating
    packets.

    But, I would like offer ftp and telnet services on an another computer behind
    the firewall for computers inside and outside of the LAN.

    I think that natd would do perfectly this job, but natd already run on
    interface tun0 for Internet access.

    What can I do to offer theses services ?

    Thanks.

    Zel
    _______________________________________________
    freebsd-net@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-net
    To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"

  • Next message: Anton Blad: "Point-to-point over ethernet"

    Relevant Pages

    • Re: Web Server not allowing external visitors
      ... | use NATD function of firewall. ... I did all this and lost all access to the internet from the other LAN ... As the Web Server at the moment then is on my FreeBSD machine I do not need ...
      (freebsd-questions)
    • IPFW+natd & Cisco VPN tunnelling....
      ... I'm working on a new firewall running FreeBSD-5.4, IPFW, and natd for a small ... I'm using a normal divert rule to forward traffic ... redirect_port tcp 192.168.1.2:www www ...
      (freebsd-questions)
    • RE: natd with several alias IPs
      ... you by your ISP and you want to round robin those 4 in the NATing ... firewall can do that by how you code the NAT statements. ... natd with several alias IPs ...
      (freebsd-questions)
    • Re: help setting up natd and ipfw on freebsd5.2.1
      ... Thanks for all the help with setting up the natd and ipfw.. ... spend some time trying to learn how to setup the proper firewall for my ... Should I just setup ...
      (freebsd-questions)
    • Re: distributed natd
      ... implementing this in ipfilter at bsdcon last year. ... > I've been thinking about ways to improve the robustness of my firewall ... > some things we just let it through ipfw, using natd to ...
      (FreeBSD-Security)