Re: CFR: bridge locking

From: Maxim Konovalov (maxim_at_macomnet.ru)
Date: 08/21/03

  • Next message: Daniel C. Sobral: "Re: CFR: bridge locking" 
    Date: Thu, 21 Aug 2003 16:26:21 +0400 (MSD)
To: "Daniel C. Sobral" <dcs@tcoip.com.br>

    On Thu, 21 Aug 2003, 09:21-0300, Daniel C. Sobral wrote:

    > Maxim Konovalov wrote:
    > > [ CC: trimmed ]
    > >
    > > On Wed, 20 Aug 2003, 14:52-0300, Daniel C. Sobral wrote:
    > >
    > > [...]
    > >
    > >>If you get bridge to send/receive packets to/from vlan interfaces
    > >>attached to them, I'll be forever grateful.
    > >>
    > >>I've been trying to configure a setup where a firewall is connected to
    > >>redundant switches, but no solution I found could handle the vlan
    > >>attachments. :-(
    > >
    > >
    > > http://people.freebsd.org/~maxim/diff/bridge.diff
    > >
    > > Let me know if it helps.
    >
    > It didn't.
    >
    > The test I'm doing is the following:
    >
    > kldload bridge
    > sysctl net.link.ether.bridge=1
    > sysctl net.link.ether.bridge_cfg="fxp1 fxp3"
    > ifconfig fxp1 up
    > ifconfig fxp3 up
    > ifconfig vlan0 create
    > ifconfig vlan0 vlan 999 vlandev fxp1
    > ifconfig vlan0 200.220.254.190/26

    sysctl net.link.ether.bridge_cfg="vlan0 fxp3" 

    -- 
Maxim Konovalov, maxim@macomnet.ru, maxim@FreeBSD.org
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
  • Next message: Daniel C. Sobral: "Re: CFR: bridge locking"

    Relevant Pages

    • Re: ATHCTRL for ATH
      ... > roztyly# sysctl dev.ath.0.ctstimeout=180 ... with the attached patch and re-compile ifconfig. ... > Daniel Dvořák wrote: ... >>clear to me if we the support or not at this point. ...
      (freebsd-current)
    • Re: ATHCTRL for ATH
      ... On Sunday 21 August 2005 13:46, Daniel Dvořák wrote: ... > to be set per hand with sysctl, ... Program I sent you was meant to be an aid until more appropriate (ifconfig ... To unsubscribe, ...
      (freebsd-current)
    • Re: Routing Table
      ... Replace your ifconfig line by the following: ... ifconfig_ed1="inet W.X.Y.Z netmask 255.255.255.0" ... HTH, Daniel ...
      (comp.unix.bsd.freebsd.misc)
    • Re: Get ip address(es) of the machine
      ... > name does in a linux box? ... sh or bash. ... man ifconfig ... Cheers, Daniel ...
      (comp.unix.shell)
    • Antigen forwarded attachment
      ... > coded the kernel code didn't think that assuming a host mask was ... you assume should be coded into ifconfig and kernel is not 100% going to be ... In fact I have multiple nets and have multiple netmask ... To unsubscribe, ...
      (freebsd-questions)