Re: 3rd nic's a charm?

From: Mike Silbersack (silby_at_silby.com)
Date: 12/29/03

  • Next message: Tim Pushor: "Re: 3rd nic's a charm?" 
    Date: Mon, 29 Dec 2003 12:33:52 -0600 (CST)
To: Tim Pushor <timp@crossthread.com>

    On Mon, 29 Dec 2003, Tim Pushor wrote:

    > I have recently added another network at home, and wanted to add another
    > interface to the box, so I added another 509b and the box became
    > unstable. It would work, then hang, then work etc. The thing just
    > rebooted itself a few minutes ago.

    Is the new NIC sharing an irq with some other device?

    Also, when you say that it hangs, is it hanging or crashing? If it's
    actually hanging, then it may be useful to add DDB to your kernel and hit
    ctrl-alt-esc to see if you can successfully break into the kernel
    debugger during one of these hangs.

    Mike "Silby" Silbersack
    _______________________________________________
    freebsd-net@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-net
    To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"

  • Next message: Tim Pushor: "Re: 3rd nic's a charm?"

    Relevant Pages

    • Re: 3rd nics a charm?
      ... I will try the kernel debugger, although I have never ventured into the ... >Is the new NIC sharing an irq with some other device? ... >actually hanging, then it may be useful to add DDB to your kernel and hit ... >debugger during one of these hangs. ...
      (freebsd-net)
    • FC5 - recently introduced system hangs, multiple systems
      ... and ran yum update on the system. ... A couple of weeks ago I needed to re-build my work laptop. ... I think the kernel loaded by yum update was 2.6.18-1.2200. ... Right from the start the laptop has exhibited hangs typically about ...
      (Fedora)
    • Re: 2.4.27 suddenly hangs
      ... > I‘m not sure that the below problem is kernel related, however, I think, ... > Occasionally, the system just hangs, without giving any error messages ... when mgetty was the last. ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: [BUG] 2.6.21-rc1,2,3 regressions on my system that I found so far
      ... On vanilla 2.6.20 suspend to disk works perfectly and suspend to ram works _almost_ perfectly. ... It happens after second CPU is brought back on-line. ... The fact is that I found thanks to RTC tricks, similar to PM_TRACE that system hangs in exactly three places ... As I see that is first time wakeup low page is addressing kernel memory by jumping to it. ...
      (Linux-Kernel)
    • Re: IO-APIC on nforce2 [PATCH] + [PATCH] for nmi_debug=1 + [PATCH] for idle=C1halt, 2.6.5
      ... Shuttle board after a BIOS update does not suffer from these hangs. ... Allen Martin already commented on this once: ... "Likely the root of the problem has to do with the way the Linux kernel is ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)