Re: [D800] Dell D800 (FBSD 5.2-release) Broadcom BCM5705M MTU/Jumbo Problem

From: Eric Anderson (anderson_at_centtech.com)
Date: 01/23/04

  • Next message: Brooks Davis: "Re: [D800] Dell D800 (FBSD 5.2-release) Broadcom BCM5705M MTU/Jumbo Problem" 
    Date: Thu, 22 Jan 2004 20:21:50 -0600
To: David Gilbert <dgilbert@dclg.ca>

    David Gilbert wrote:

    >>>>>>"Eric" == Eric Anderson <anderson@centtech.com> writes:
    >>>>>>
    >>>>>>
    >
    >Eric> As a data point, my BCM5702 (Dell D600) works fine: # ifconfig
    >Eric> -a bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
    >Eric> 9000 options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> inet6
    >Eric> fe80::20b:dbff:fea3:f9a1%bge0 prefixlen 64 scopeid 0x1 inet
    >Eric> 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 ether
    >Eric> 00:0b:db:a3:f9:a1 media: Ethernet autoselect (none) status: no
    >Eric> carrier
    >
    >What is the probe line for your bge?
    >
    >Mine is:
    >
    >bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3001> mem 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2
    >bge0: Ethernet address: 00:0b:db:94:3d:01
    >miibus0: <MII bus> on bge0
    >
    >
    bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem
    0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2
    bge0: Ethernet address: 00:0b:db:a3:f9:a1
    miibus0: <MII bus> on bge0
    brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
    brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
    1000baseTX-FDX, auto

    Strange - it shows BCM5702, then BCM5703

    Eric 

    -- 
------------------------------------------------------------------
Eric Anderson     Sr. Systems Administrator    Centaur Technology
Today is the tomorrow you worried about yesterday.
------------------------------------------------------------------
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
  • Next message: Brooks Davis: "Re: [D800] Dell D800 (FBSD 5.2-release) Broadcom BCM5705M MTU/Jumbo Problem"

    Relevant Pages