PPTP mtu

From: Jay Hall (jhall_at_vandaliamo.net)
Date: 03/27/04

Next message: Igor Sysoev: "Re: sendfile returning ENOTCONN under heavy load"

Previous message: User Ernie: "PCI ADSL card and PPPoA"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Date: Sat, 27 Mar 2004 08:08:34 -0600
To: freebsd-net@freebsd.org

I am using mpd to establish a DSL connection and, once that connection
is established, I am brining up a PPTP connection. However, I am having
problems keeping the PPTP connection up.

In the logs on the remote machine, I am seeing the following error message:

Mar 27 00:22:52 ST_CHARLES mpd: [vpn] CCP: rec'd Configure Nak #1 link 0
(Req-Sent)
Mar 27 00:22:52 ST_CHARLES mpd: MPPC
Mar 27 00:22:52 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:22:52 ST_CHARLES mpd: [vpn] CCP: SendConfigReq #2
Mar 27 00:22:52 ST_CHARLES mpd: MPPC
Mar 27 00:22:52 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:22:52 ST_CHARLES mpd: [vpn] error writing len 14 frame to
bypass: No route to host
Mar 27 00:22:54 ST_CHARLES mpd: [vpn] CCP: rec'd Configure Request #56
link 0 (Req-Sent)
Mar 27 00:22:54 ST_CHARLES mpd: MPPC
Mar 27 00:22:54 ST_CHARLES mpd: 0x01000060: MPPE, 40 bit, 128 bit,
stateless
Mar 27 00:22:54 ST_CHARLES mpd: [vpn] CCP: SendConfigNak #56
Mar 27 00:22:54 ST_CHARLES mpd: MPPC
Mar 27 00:22:54 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:22:54 ST_CHARLES mpd: [vpn] error writing len 14 frame to
bypass: No route to host
Mar 27 00:22:54 ST_CHARLES mpd: [vpn] CCP: SendConfigReq #3
Mar 27 00:22:54 ST_CHARLES mpd: MPPC
Mar 27 00:22:54 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:22:54 ST_CHARLES mpd: [vpn] error writing len 14 frame to
bypass: No route to host
Mar 27 00:22:56 ST_CHARLES mpd: [vpn] CCP: rec'd Configure Request #57
link 0 (Req-Sent)
Mar 27 00:22:56 ST_CHARLES mpd: MPPC
Mar 27 00:22:56 ST_CHARLES mpd: 0x01000060: MPPE, 40 bit, 128 bit,
stateless
Mar 27 00:22:56 ST_CHARLES mpd: [vpn] CCP: SendConfigNak #57
Mar 27 00:22:56 ST_CHARLES mpd: MPPC
Mar 27 00:22:56 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:22:56 ST_CHARLES mpd: [vpn] error writing len 14 frame to
bypass: No route to host
Mar 27 00:22:56 ST_CHARLES mpd: [vpn] CCP: SendConfigReq #4
Mar 27 00:22:56 ST_CHARLES mpd: MPPC
Mar 27 00:22:56 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:22:58 ST_CHARLES mpd: [vpn] CCP: rec'd Configure Request #58
link 0 (Req-Sent)
Mar 27 00:22:58 ST_CHARLES mpd: MPPC
Mar 27 00:22:58 ST_CHARLES mpd: 0x01000060: MPPE, 40 bit, 128 bit,
stateless
Mar 27 00:22:58 ST_CHARLES mpd: [vpn] CCP: SendConfigNak #58
Mar 27 00:22:58 ST_CHARLES mpd: MPPC
Mar 27 00:22:58 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:22:58 ST_CHARLES mpd: [vpn] CCP: SendConfigReq #5
Mar 27 00:22:58 ST_CHARLES mpd: MPPC
Mar 27 00:22:58 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:23:00 ST_CHARLES mpd: [vpn] CCP: rec'd Configure Request #59
link 0 (Req-Sent)
Mar 27 00:23:00 ST_CHARLES mpd: MPPC
Mar 27 00:23:00 ST_CHARLES mpd: 0x01000060: MPPE, 40 bit, 128 bit,
stateless
Mar 27 00:23:00 ST_CHARLES mpd: [vpn] CCP: SendConfigNak #59
Mar 27 00:23:00 ST_CHARLES mpd: MPPC
Mar 27 00:23:00 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:23:00 ST_CHARLES mpd: [vpn] CCP: SendConfigReq #6
Mar 27 00:23:00 ST_CHARLES mpd: MPPC
Mar 27 00:23:00 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:23:02 ST_CHARLES mpd: [vpn] CCP: rec'd Configure Request #60
link 0 (Req-Sent)
Mar 27 00:23:02 ST_CHARLES mpd: MPPC
Mar 27 00:23:02 ST_CHARLES mpd: 0x01000060: MPPE, 40 bit, 128 bit,
stateless
Mar 27 00:23:02 ST_CHARLES mpd: [vpn] CCP: SendConfigNak #60
Mar 27 00:23:02 ST_CHARLES mpd: MPPC
Mar 27 00:23:02 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:23:02 ST_CHARLES mpd: [vpn] CCP: SendConfigReq #7
Mar 27 00:23:02 ST_CHARLES mpd: MPPC
Mar 27 00:23:02 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:23:04 ST_CHARLES mpd: [vpn] CCP: rec'd Configure Request #61
link 0 (Req-Sent)
Mar 27 00:23:04 ST_CHARLES mpd: MPPC
Mar 27 00:23:04 ST_CHARLES mpd: 0x01000060: MPPE, 40 bit, 128 bit,
stateless
Mar 27 00:23:04 ST_CHARLES mpd: [vpn] CCP: SendConfigNak #61
Mar 27 00:23:04 ST_CHARLES mpd: MPPC
Mar 27 00:23:04 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:23:04 ST_CHARLES mpd: [vpn] CCP: SendConfigReq #8
Mar 27 00:23:04 ST_CHARLES mpd: MPPC
Mar 27 00:23:04 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:23:06 ST_CHARLES mpd: [vpn] CCP: SendConfigReq #9
Mar 27 00:23:06 ST_CHARLES mpd: MPPC
Mar 27 00:23:06 ST_CHARLES mpd: 0x01000040: MPPE, 128 bit, stateless
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] CCP: rec'd Configure Request #63
link 0 (Req-Sent)
Mar 27 00:23:08 ST_CHARLES mpd: MPPC
Mar 27 00:23:08 ST_CHARLES mpd: 0x01000060: MPPE, 40 bit, 128 bit,
stateless
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] CCP: not converging
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] CCP: parameter negotiation failed
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] CCP: Close event
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] CCP: state change Req-Sent -->
Closing
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] CCP: SendTerminateReq #10
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] CCP: encryption required, but MPPE
was not negotiated in both directions
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] CCP: failed to negotiate required
encryption
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] CCP: Close event
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] CCP: state change Closing --> Closed
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] CCP: LayerFinish
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] IPCP: failed to negotiate required
encryption
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] IPCP: LayerFinish
Mar 27 00:23:08 ST_CHARLES mpd: [vpn] IPCP: LayerStart

On the server I am seeing the following messages:

[pptp1] CCP: parameter negotiation failed

I think this might be an MTU problem. When the MTU is negotiated at
1456, the connection runs fine. However, at values higher or lower, the
connection does not work, and will drop after a few seconds.

I am using mpd-3.15 on both ends of the connection.

Any suggestions would be greatly appreciated. Thank in advance for your
assistance.

Jay
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"

Next message: Igor Sysoev: "Re: sendfile returning ENOTCONN under heavy load"

Previous message: User Ernie: "PCI ADSL card and PPPoA"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Relevant Pages

RE: PPTP MTU
... MTU of 1458 and the client side sets an MTU of 1456. ... connection comes up and runs like a champ as long as the MTU is 1456. ... I am using mpd to establish a DSL connection and, ... Mar 27 00:22:52 ST_CHARLES mpd: MPPC ...
(freebsd-net)
Re: PPTP MTU
... Mar 29 06:37:37 ST_CHARLES mpd: mpd: local IP address for PPTP is 0.0.0.0 ... Mar 29 06:37:37 ST_CHARLES mpd: MPPC ... Mar 29 07:28:04 MNEA-HQ mpd: ACFCOMP ...
(freebsd-net)
Re: MPPC in -stable
... The mpd ppp program supports MPPC and Stac. ... To unsubscribe, ...
(freebsd-stable)
Re: MPD Issues - Errors and Mysterious Packet Loss
... >> When I connect to the VPN I get a connection status box in my XP sys ... >> tell mpd to use compression and have checked its enabled in the VPN ...
(freebsd-net)
Mpd-4.2 released.
... I'm glad to present version 4.2 of MPD. ... performance improvements and fixes. ... It allows mpd to accept incoming connection of ... accepting incoming PPPoE connection from client and forwarding it using ...
(freebsd-net)