Dlink DWL-650 RevP support?

From: Peter Serwe (peter_at_easytree.net)
Date: 04/19/04

  • Next message: Ruslan Ermilov: "Re: Dlink DWL-650 RevP support?" 
    Date: Mon, 19 Apr 2004 12:28:50 -0400
To: freebsd-net@freebsd.org

    Pardon me if this is well covered ground, but I've tried
    some targeted archive searching, and not found it.

    I have a DLink DWL-650 card, I believe it's a PRISM3
    chipset card. It's the currently available bone-stock, plain
    16-bit 11Mbps card running @ 5V. My primary purpose
    for this card was to use it for wireless security work.

    I've enabled wi support in my 4.9-STABLE kernel, just
    cvsup'd and done a make buildworld, buildkernel,
    installkernel, installworld in single user after rebuilding
    the kernel last night.

    I run into the following problem when I insert the card.

    "pccard[54]: No card in database for "D-Link"("DWL-650 Wireless PC Card
    RevP")

    Is there anything I can do, short of writing a driver, which
    is beyond my capability, to get this card working? If not,
    can anyone suggest a cheap alternative for a card that
    will do 11,22, or 54Mbps?

    Thanks,

    Peter 

    --
Peter Serwe <peter@easytree.net>
Cheaper, Faster, Better, pick any two.
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
  • Next message: Ruslan Ermilov: "Re: Dlink DWL-650 RevP support?"

    Relevant Pages

    • Re: SUSE 10
      ... > Fritz Box SL Wlan and get an IP Adress, ... or the Netgear MA301 PCI Card. ... kernel source for the running kernel available as you will be building a ... Configuration successful. ...
      (alt.os.linux.suse)
    • allocation failures with CBQ bandwidth limiting & high net use (was Re: Filesystem kernel hangup
      ... limiting, queuing and prioritization, *and* high network use (using ... "full_kernel_output" file for an idea of what kernel messages I was ... My IRQ is shared with that above TV card, ... kernel messages for about two hours from boot to crash). ...
      (Linux-Kernel)
    • athlon-xp + fakeraid regression
      ... The build completes fine, the kernel boots fine, the machine will seem to be fine as long as it remains quiescent. ... At the beginning, just after hitting enter on the make command, one of the ad4 disk light goes on solid for several seconds. ... There is a well known thing where these cheap pata fakeraid cards will try to do ata133 if the drive says it can, when really, even if he drives are new ata133 drives and the cables are new and short and shielded, you still shouldn't try to do ata133 since the spec is too tight and you'll just get bit errors or other failures. ... The fix is use ata100 somehow, either by disabling dma entirely in loader.conf (since you have no more selective option there, and the raid card bios never has an option for controlling pio/dma mode like motherboard bios's have) and then use atacontrol in rc.early to set udma5, or by using disks that can only do ata100 and only advertise ata100 to the controller. ...
      (freebsd-current)
    • RE: FC4 And Dlink DWL-G630 WiFi card, A Complete NO-GO
      ... FC4 And Dlink DWL-G630 WiFi card, ... Linuxant, as per instructions at ndiswrapper's homepage. ... kernel and kernel-devel I got "wrong module ...
      (Fedora)
    • Re: modem works in sarge but not etch or lenny
      ... When I ran sarge with the modem card physically removed, ... I don't really understand the structure of the kernel so I don't ... It worked in Sarge but I have not been able to get it to work in my ...
      (Debian-User)