FreeVRRPD problem

From: Bruno Afonso (brunomiguel_at_dequim.ist.utl.pt)
Date: 06/24/04

  • Next message: Dan Nelson: "Re: using netgraph to connect 2 physical interfaces into one virtual interface" 
    Date: Thu, 24 Jun 2004 05:35:30 +0100
To: freebsd-net@freebsd.org

    Hello,

    I'm trying to have failover with a couple boxes and they're basically
    doing NAT and firewalling. 1 box has a couple fxp and the other a couple
    rls. Is this supposed to be a problem for freevrrpd?

    Only fxp box actually can use the fail-over ips. The backup box cannot
    use them if we start freevrrp deamon without starting on the master
    first and it's impossible to have network access to.

    Further more, if we have master and start backup, it all goes ok. If
    master goes down, backup never takes over and backup is from now one
    impossible to access.

    Main box: 5.2.1-p5
    backup box: 5.0

    Config for the fxp box:

    [VRID]
    serverid = 2
    interface = fxp0
    priority = 255
    addr = 10.10.0.1/32
    password = passie
    useVMAC = yes
    carriertimeout = 10
    spanningtreelatency = 40
    #sendgratuitousarp = yes
    #masterscript = "/usr/local/bin/master_script.sh"
    #backupscript = "/usr/local/bin/backup_script.sh"
    vridsdep = 1

    [VRID]
    serverid = 1
    interface = fxp1
    priority = 255
    addr = x.x.x.253/32
    password = passie
    useVMAC = yes
    carriertimeout = 10
    spanningtreelatency = 40
    #sendgratuitousarp = yes
    #masterscript = "/usr/local/bin/master_script.sh"
    #backupscript = "/usr/local/bin/backup_script.sh"
    vridsdep = 2

    backup box:

    [VRID]
    serverid = 2
    interface = rl0
    priority = 250
    addr = 10.10.0.1/32
    password = passie
    useVMAC = yes
    carriertimeout = 10
    spanningtreelatency = 40
    #sendgratuitousarp = yes
    #masterscript = "/usr/local/bin/master_script.sh"
    #backupscript = "/usr/local/bin/backup_script.sh"
    vridsdep = 1

    [VRID]
    serverid = 1
    interface = rl1
    priority = 250
    addr = x.x.x.253/32
    password = passie
    useVMAC = yes
    carriertimeout = 10
    spanningtreelatency = 40
    #sendgratuitousarp = yes
    #masterscript = "/usr/local/bin/master_script.sh"
    #backupscript = "/usr/local/bin/backup_script.sh"
    vridsdep = 2

    I'm using freevrrpd from CVS.

    On both machines, I get in /var/log/messages, gazillions of

    "all errors are cleared on interface xxx"

    There's not any particular information in backup box saying something
    went wrong...

    Any ideas ?

    BA 

    -- 
Bruno Miguel Afonso
Biological Eng. student
D.E.Q. @ I.S.T. - Portugal
GnuPG Public key: http://dequim.ist.utl.pt/~bruno/gpg
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
  • Next message: Dan Nelson: "Re: using netgraph to connect 2 physical interfaces into one virtual interface"

    Relevant Pages

    • Dial Backup Questions
      ... I'm trying to set up ISDN dial backup for an E1 ... interface BRI1 ... dialer pool-member 2 ... command because the Cisco Command Reference cheerfully declares: ...
      (comp.dcom.sys.cisco)
    • Re: ASA5510 and Backup Exec
      ... In addition to that also take not that hardcoding doesn't always work. ... However the Pix flat out ignored this setting ... The network backups which were pegging the inside interface out at ... we've a W2003 Backupserver running Backup Exec 10.0. ...
      (comp.dcom.sys.cisco)
    • Re: How I love Time Machine :)
      ... John Slade wrote: ... machine backup, I just formatted it there and then and reinstalled. ... The restore took an amazingly long time, though, but it was a 300+ GB ... Then why does Apple use a SATA interface inside their ...
      (comp.sys.mac.advocacy)
    • Re: ASA5510 and Backup Exec
      ... doesn't mean it will honor those settings at all. ... The network backups which were pegging the inside interface out at ... You might want to look into hardcoding those ... we've a W2003 Backupserver running Backup Exec 10.0. ...
      (comp.dcom.sys.cisco)
    • Re: Dial Backup Questions
      ... I'm trying to set up ISDN dial backup for an E1 ... ~ interface BRI1 ... ~ dialer pool-member 2 ... ~ b) In the multilink configuration, I avoided the "dialer load-threshold" ...
      (comp.dcom.sys.cisco)