Re: Bridge
From: Vince Hoffman (jhary_at_unsane.co.uk)
Date: 11/02/04
- Previous message: John Polstra: "Re: Irritation regarding precision of ping(8)..."
- In reply to: AndygreenNet_at_netscape.net: "Bridge"
- Next in thread: AndygreenNet_at_netscape.net: "Re: Bridge"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Tue, 2 Nov 2004 17:30:56 +0000 (GMT) To: AndygreenNet@netscape.net
On Mon, 1 Nov 2004 AndygreenNet@netscape.net wrote:
> Hi everybody!
>
> I'm try configure bridge on FreeBSD box.
>
> Box configuration:
> %uname -srp
> FreeBSD 5.3-RC1 i386
> %ifconfig
> xl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
> options=9<RXCSUM,VLAN_MTU>
> ether 00:04:79:68:02:e6
> media: Ethernet autoselect (none)
> status: no carrier
> fxp0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
> options=48<VLAN_MTU,POLLING>
> inet 213.59.235.126 netmask 0xfffffff8 broadcast 213.59.235.127
> ether 00:0e:0c:00:58:60
> media: Ethernet autoselect (100baseTX <full-duplex>)
> status: active
> fxp1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
> options=48<VLAN_MTU,POLLING>
> ether 00:07:e9:14:01:99
> media: Ethernet autoselect (100baseTX <full-duplex>)
> status: active
> fxp2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
> options=48<VLAN_MTU,POLLING>
> inet 213.59.128.190 netmask 0xfffffffc broadcast 213.59.128.191
> ether 00:07:e9:14:05:be
> media: Ethernet autoselect (none)
> status: no carrier
> plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
> pflog0: flags=0<> mtu 33208
> pfsync0: flags=0<> mtu 2020
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
> inet 127.0.0.1 netmask 0xff000000
> vlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
> ether 00:07:e9:14:05:be
> media: Ethernet autoselect (none)
> status: no carrier
> vlan: 218 parent interface: fxp2
> vlan1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
> inet 62.33.196.254 netmask 0xffffff80 broadcast 62.33.196.255
> ether 00:07:e9:14:01:99
> media: Ethernet autoselect (100baseTX <full-duplex>)
> status: active
> vlan: 155 parent interface: fxp1
> vlan2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
> ether 00:07:e9:14:01:99
> media: Ethernet autoselect (100baseTX <full-duplex>)
> status: active
> vlan: 156 parent interface: fxp1
> vlan3: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
> ether 00:07:e9:14:01:99
> media: Ethernet autoselect (100baseTX <full-duplex>)
> status: active
> vlan: 90 parent interface: fxp1
> vlan4: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
> ether 00:0e:0c:00:58:60
> media: Ethernet autoselect (100baseTX <full-duplex>)
> status: active
> vlan: 156 parent interface: fxp0
> vlan5: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
> ether 00:04:79:68:02:e6
> media: Ethernet autoselect (none)
> status: no carrier
> vlan: 90 parent interface: xl0
> %vi /usr/local/etc/rc.d/bridge.sh
> #!/bin/sh
> #
> #
>
> if [ -z "${source_rc_confs_defined}"]; then
> if [ -r /etc/defaults/rc.conf ]; then
> . /etc/defaults/rc.conf
> source_rc_confs
> elif [ -r /etc/rc.conf ]; then
> . /etc/rc.conf
> fi
> fi
>
> case "$1" in
> start)
> case "${bridge_enable}" in
> [Yy][Ee][Ss])
This looks to me like you need to add
bridge_enable="YES"
to /etc/rc.conf
> echo -n 'Starting bridge'
> sysctl -w net.link.ether.bridge.enable=1
> sysctl -w net.link.ether.bridge.ipfw=1
> sysctl -w net.link.ether.bridge.config=vlan0:218,vlan1:155,vlan2:156,vlan3:90,vlan4:156,vlan5:90,xl0:218,fxp0:155
> ;;
> esac
> ;;
> stop)
> sysctl -w net.link.ether.bridge.enable=0
> ;;
> *)
> echo "Usage: `basename $0` {start|stop}" >&2
> ;;
> esac
>
> exit
> %vi /etc/rc.conf
> firewall_enable="YES" # Set to YES to enable firewall functionality
> firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
> firewall_type="OPEN" # Firewall type (see /etc/rc.firewall)
> firewall_quiet="YES" # Set to YES to suppress rule display
> firewall_logging="YES" # Set to YES to enable events logging
> firewall_flags="" # Flags passed to ipfw when type is a file
> ip_portrange_first="49190" # Set first dynamically allocated port
> ip_portrange_last="65535" # Set last dynamically allocated port
>
> Bridge do not work!
> What do I do incorrectly?
>
> __________________________________________________________________
> Switch to Netscape Internet Service.
> As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register
>
> Netscape. Just the Net You Need.
>
> New! Netscape Toolbar for Internet Explorer
> Search from anywhere on the Web and block those annoying pop-ups.
> Download now at http://channels.netscape.com/ns/search/install.jsp
> _______________________________________________
> freebsd-net@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
>
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
- Previous message: John Polstra: "Re: Irritation regarding precision of ping(8)..."
- In reply to: AndygreenNet_at_netscape.net: "Bridge"
- Next in thread: AndygreenNet_at_netscape.net: "Re: Bridge"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
