Re: em(4) VLAN + PROMISC still doesn't work with latest CVS version

From: Iasen Kostov (tbyte_at_OTEL.net)
Date: 12/08/04

  • Next message: chip: "Re: TCPDUMP bandwidth capability" 
    Date: Wed, 08 Dec 2004 06:16:16 +0200
To: Iasen Kostov <tbyte@OTEL.net>

       Sorry for that much posts but something weird is going on ... I left
    bridge for a while (more than route/arp cache period) and then the stopped.
    Same happens when you clear the arp cache as I find out. And as I
    expected arps didn't get from the bridge to the host (wherever who-has
    ot is-on).
    And something else - if the Host has never send an IP packet to the
    bridge nothing could pass from bridge to host. I'm clueless but this make
    bridge unusable with "em" and vlans.

    _______________________________________________
    freebsd-net@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-net
    To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"

  • Next message: chip: "Re: TCPDUMP bandwidth capability"

    Relevant Pages

    • Re: How connect 2 PC with ath in hostap mode ?
      ... > MJ> How are you bridging the interfaces? ... The "old" bridge code is removed from CURRENT anyway. ... Try to play with different sysctl values for ath as well, ... > 0.700ms for any host in another net segment. ...
      (freebsd-net)
    • if_bridge steals IP address of non-member interface
      ... I've configured this bridge with STP although I don't think this should be the cause of the problem. ... On the same host which is doing the bridging, I've got another interface (fxp0) which is configured "normally", i.e. it has an IP address on the subnet which the bridge divides. ... em1 is plugged into switch B ...
      (freebsd-net)
    • Re: [opensuse] VirtualBox bridged connection in OpenSuse 10.3
      ... Virtualbox 1.6 host networking doesn't work correctly ... I have tried to add eth0 to the bridge: ... Then restarted network and lost inet on the host system (even without ...
      (SuSE)
    • Re: distributed bridging [script]
      ... >> I'm trying to create a configuration that would bridge interfaces on ... Each host would have at least two interfaces, ... here's a completely untested script. ...
      (freebsd-net)
    • Re: How connect 2 PC with ath in hostap mode ?
      ... MJ> How are you bridging the interfaces? ... kldload ath, ath_hal, bridge, fxp ... Bridging work fine and uptime for both host more ... MJ> What I noticed on NetBSD (where the ath driver is not yet fully ported) ...
      (freebsd-net)