RE: Two NIC's connected to same subnet: routing question

From: Xin LI (delphij_at_frontfree.net)
Date: 02/17/05

  • Next message: Julian Stacey: "nslookup problem on FreeBSD-5.3: problem with non FQN domain"
    To: henrysu@nttmcl.com
    Date: Fri, 18 Feb 2005 01:36:29 +0800
    
    
    

    It seems that this can be implemented through ng_one2many netgraph node.
    I'm looking for some documentation about this. Well... Given that my
    own server is already online and it is several kilometers away from me,
    I'd rather test the feature at lab and then go there for a shoot.

    在 2005-02-01二的 10:37 -0800,Henry Su写道:
    > You can configure both NIC as /32. You also need proxy arp installed and
    > listen on both NIC. Then the traffic should be able to follow between two
    > NICs. Since Proxy ARP always answers its MAC to clients, so the clients can
    > always send traffic to em1 or em0. Based on client's mac entry in the ARP
    > table, client to client traffic is easily transferred. Other traffic should
    > be able to direct to default gateway.
    >
    > If you know other options, I am interested to hear.

    Cheers,

    -- 
    Xin LI <delphij delphij net>  http://www.delphij.net/
    
    



  • Next message: Julian Stacey: "nslookup problem on FreeBSD-5.3: problem with non FQN domain"

    Relevant Pages

    • Re: Two NICs connected to same subnet: routing question
      ... > NICs. ... Since Proxy ARP always answers its MAC to clients, ...
      (freebsd-net)
    • RE: SBS2k3 VPN Issue
      ... Your SBS server has only one Nic. ... VPN clients to the same IP as the LAN, the clients can RDP either Server or ... When the server assigns the VPN clients the different IP ... <between the internal and external nics, hence routing the request, or have ...
      (microsoft.public.windows.server.sbs)
    • Re: Win2K RRAS/VPN Help
      ... > if you try to configure different gateway settings on the NICs). ... > on the server itself. ... *.201 thru *.225 IPs for VPN clients. ... RRAS using *.200 and clients getting *.200+ IPs. ...
      (microsoft.public.win2000.ras_routing)
    • Re: Lan setup 2 nic
      ... As you did a fresh install, you will need to rejoin the clients. ... The external nic should NOT have the Client for MS Networks checked. ... What 2 available TCP/IP ... >> Attached a screenshots of my 2 nics. ...
      (microsoft.public.windows.server.sbs)
    • Problem using Remoting with 2 NICs
      ... I have clients connecting successfully on NIC 1, ... After each Server Channel is registered, ... When both NICs are enabled. ...
      (microsoft.public.dotnet.framework.remoting)