Re: wierd problems with openvpn [update]

From: Z.C.B. (vvelox_at_vvelox.net)
Date: 09/23/05

  • Next message: Crist J. Clark: "Fixed Dest Port for traceroute(8)"
    Date: Fri, 23 Sep 2005 12:17:15 -0500
    To: Dave+Seddon <dave-dated-1127880493.c729cf@seddon.ca>
    
    

    It works perfectly fine with out pf. Not gotten around to debugging
    it yet. Threw it behind the router on a server and forwarded the port.

    On Fri, 23 Sep 2005 14:08:11 +1000
    Dave+Seddon <dave-dated-1127880493.c729cf@seddon.ca> wrote:

    > So ditch pf and let us know. Or swap to ipf
    >
    > Z.C.B. writes:
    >
    > > I am positive it is something to do with pf. I copied the exact
    > > same config file from the vpn server over to another box and
    > > pointed the client at it and it worked perfectly fine. Any one
    > > see any thing odd in that pf setup or have any suggestions or the
    > > like?
    > >
    > > On Thu, 22 Sep 2005 20:55:05 -0500
    > > Vulpes Velox <v.velox@vvelox.net> wrote:
    > >
    > >> Just been messing around with openvpn and trying to get it up and
    > >> running using http://openvpn.net/static.html as a guide. It
    > >> works, but I run into a weird problem with data moving across
    > >> the vpn. I can send a ping across from the client to the server,
    > >> but the server never sends any thing back. I used tcpdump to
    > >> make sure the server is seeing it and it is. I see it going
    > >> there on both machines, but I never see a reply.
    > >>
    > >> I am running pf on the server... but it should not be doing any
    > >> thing...
    > >>
    > >>
    > >> server pf.conf...
    > >> ext_if="fxp1"
    > >> int_if="fxp0"
    > >> internal_net="192.168.0.0/8"
    > >> dcc = "{ 6115:6130 }"
    > >> bittorrent = "{ 6881:6889 }"
    > >> nat on $ext_if from $internal_net to any -> ($ext_if)
    > >> rdr on $ext_if proto tcp from any to any port $dcc -> 192.168.0.2
    > >> rdr on $ext_if proto tcp from any to any port $bittorrent ->
    > >> 192.168.0.2 rdr on $ext_if proto udp from any to any port 27960
    > >> -> 192.168.0.2 pass in all
    > >> pass out all
    > >>
    > >>
    > >>
    > >> server config...
    > >> dev tun
    > >> secret vulpes-static.key
    > >> ifconfig 10.8.0.1 10.8.0.2
    > >> comp-lzo
    > >>
    > >>
    > >>
    > >> host config...
    > >> dev tun
    > >> secret vulpes-static.key
    > >> ifconfig 10.8.0.2 10.8.0.1
    > >> remote inari
    > >> comp-lzo
    > >> _______________________________________________
    > >> freebsd-net@freebsd.org mailing list
    > >> http://lists.freebsd.org/mailman/listinfo/freebsd-net
    > >> To unsubscribe, send any mail to
    > >> "freebsd-net-unsubscribe@freebsd.org"
    > > _______________________________________________
    > > freebsd-net@freebsd.org mailing list
    > > http://lists.freebsd.org/mailman/listinfo/freebsd-net
    > > To unsubscribe, send any mail to
    > > "freebsd-net-unsubscribe@freebsd.org"
    >
    >
    _______________________________________________
    freebsd-net@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-net
    To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"


  • Next message: Crist J. Clark: "Fixed Dest Port for traceroute(8)"

    Relevant Pages

    • Re: Still cant connect to RWW or OWA remotely
      ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
      (microsoft.public.windows.server.sbs)
    • Re: Still cant connect to RWW or OWA remotely
      ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
      (microsoft.public.windows.server.sbs)
    • Re: changed IP address: cant receive email & need to make domain name match IP address
      ... Port Forwarding for 2Wire 1701HG ... SBS CDs, but it's always a good idea to keep them handy. ... As you are set up now, your SBS server is "bare to the Internet" (not ... need to buy at least another inexpensive router to put between the SBS ...
      (microsoft.public.windows.server.sbs)
    • Re: Cant connect to Mailserver
      ... domain's zone files on the dyndns server, ... I'm presuming it's a simple port forward from WAN to LAN on ... When I telnet to port 25 I should get a response from your ... Are the correct ports open in the router? ...
      (microsoft.public.windows.server.sbs)
    • Re: Can not access Web and FTP sites from Internet
      ... your IP Configuration on the Server is correctly. ... Connecting To 12.208.215.87...Could not open connection to the host, ... 1> From the result, we can see the telnet failed, which means the router ... does not forward Port 443 to SBS Server. ...
      (microsoft.public.windows.server.sbs)