Re: Cannot unload if_ath kernel module / machine does not shut down

Hi there,

I changed from WEP to WPA encryption, now the laptop is shutting down
correctly. Strange, why it is not working with WEP encryption?

Anyway, I am happy now!

Andreas

Am Montag, den 20.02.2006, 22:12 +0100 schrieb Andreas Lattka:
Hello All there,

I have got a shiny new Sony Vaio VGN-FS415E, installed FBSD6, (FreeBSD
6.0-RELEASE-p4). For wireless connection there is built in an Atheros
5212 chip. I configured the kernel conf file to include all the atheros
modules according to the man ath:

device ath
device ath_hal
device ath_rate_onoe,

all works well until the machine is to be shutdown. When I enter halt
-p, or reboot, the machine starts to shut down, but stops, after the
uptime message is displayed. Nothing more happens, I have to manually
switch off the machine. The next time I switch on the machine, the oss
sound will crash the machine.

I did remember, that I had no problem to shut down the machine when the
ath modules were not used, so I cleared the ath modules from the kernel
conf file and did include if_ath into the loader.conf. Again, all is
going well until shutdown. Same bad behaviour. Then I tried to manually
unload the ath modules, only ath_rate module can be unloaded, ath_hal
gives device busy, and trying to unload the if_ath will freeze the
machine. I confirmed that the Atheros 5211 is working well, 5212 give
those problems.
Does anybody have any idea how to unload the if_ath module?

Thank you!

Andreas

_______________________________________________
freebsd-net@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@xxxxxxxxxxx"

_______________________________________________
freebsd-net@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: Cannot unload if_ath kernel module / machine does not shut down
    ... why it is not working with WEP encryption? ... There should also be console messages printed by the wlan_wep module in the event you try to unload the module while there are still references; ... Am Montag, den 20.02.2006, 22:12 +0100 schrieb Andreas Lattka: ... ath modules were not used, so I cleared the ath modules from the kernel ...
    (freebsd-net)
  • Cannot unload if_ath kernel module / machine does not shut down
    ... For wireless connection there is built in an Atheros ... The next time I switch on the machine, ... ath modules were not used, so I cleared the ath modules from the kernel ... unload the ath modules, only ath_rate module can be unloaded, ath_hal ...
    (freebsd-net)