Re: PPP using PPPoE failure
- From: Dimitar Peikov <dimitar.peikov@xxxxxxxxx>
- Date: Wed, 15 Nov 2006 22:24:49 +0200
On Wednesday 15 November 2006 11:15, you wrote:
On Wed, 15 Nov 2006, Dimitar Peikov wrote:
Hello
I'm just playing with 6.2-BETA3 and discovered something odd.
I've setup my PPPoE connection to my ISP (it is working OK).
The problem I observed appears while PPPoE connection is active I want
to exit from PPP program. Then my PPP connection is closed, but I'm
not able to open another session via tun0 adapter until restart. Also
ppp process hangs (I guess it is blocked while try to open tun0
interface) - I waited for completion about 1min and didn't get it.
Message that appears in ppp.log is :
<<<
Phase: Using interface: tun0
Phase: deflink: Created in closed state
<<<
Hope that this will help.
can you enable
Log All
in ppp.conf and see what it says then?
Also a ngctl list and you checking tcpdump if you can see PPPoE PADI
PADO PAD PADR PADS PADT packets would be helpful. Do that on the
interface pppoe is configure for (not tun0).
Thank you for the feedback, but now I'm not able to reproduce it.
So far I'll try to get this error again and when I catch it, I'll send
requested information.
I'm continuing to try to reproduce this issue.
---
Dimitar Peikov from Gmail
_______________________________________________
freebsd-net@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@xxxxxxxxxxx"
- References:
- PPP using PPPoE failure
- From: Dimitar Peikov
- Re: PPP using PPPoE failure
- From: Bjoern A. Zeeb
- PPP using PPPoE failure
- Prev by Date: rl nic don't work on Acer Aspire 3610
- Next by Date: watchguard VPN
- Previous by thread: Re: PPP using PPPoE failure
- Next by thread: em driver - strange behavior
- Index(es):
Relevant Pages
|
